1. Material: aluminum alloy
2. Multifunctional gaming dock station, suitable for ROG / Legion Go / OneXPlayer / Steam Deck / Switch / Ayaneo / Win / Razer Edge / Abxylute / MSI, etc.
3. Detachable dual fans for fast cooling and heat dissipation
4. Supports PD3.0 100W fast charging
5. 4K/60Hz HD output
6. 10/100/1000Mbps adaptive Gigabit network port
7. 4 USB ports, can be connected to mouse, keyboard, game controller, etc. to improve gaming experience
8. RGB atmosphere light, 7 kinds of light color changes
9. Size: 150.2x82.6x102.6mm
10. Cable length: 245+/-10mm
11. Note: Only handheld game consoles with a fully functional Type-C interface can support all docking station functions, otherwise only partial functions are supported.

1. Protect and prevent the joystick from being scratched
2. Wide compatibility for Steam Deck, PS5, PS4, Xbox joysticks
3. Highly elastic silicone material, not easy to break
4. No more bumps, quieter, smoother movement, no grinding or catching
5. Material: silicone
6. Description: only the protective ring, no other

1. Designed specifically for carrying PlayStation Portal when traveling. This hard suitcase features a minimalist design that saves space and is easy to carry.
2. Made of durable EVA material with soft velvet lining, it can absorb the impact of a drop or collision, ensuring full protection for your gaming console.
3. There is a dedicated groove inside for storing game consoles, which is custom designed for a perfect fit.
4. 1680D Oxford cloth surface material, waterproof, scratch resistant, and impact resistant.
5. Other accessories: PC protective case, two protective films, and a pair of joystick caps.
6. Note: The product does not include the PlayStation Portal.

1. Includes 2 replacement back brackets, suitable for Nintendo Switch consoles
2. The bracket has been installed with screws and hardware, no screwdriver is required to install it on the game console!
3. Made of high-quality ABS material, it is sturdy and not easy to break, and has a long service life.
4. Material: ABS+copper+silicone
5. Net weight: 5g/piece

1. Suitable for GB game cards and GBC game cards
2. Protect your game cartridges from water, dust, dirt, drops, collisions, and prevent scratches. There are anti-slip lines on the surface to extend the service life of your cartridges.
3. Transparent shell, clearly display your game cards without cover and pattern blocking.
4. 10 transparent game cartridge boxes, lightweight, durable, and sturdy. It is small enough to fit in your pocket, easy to use and carry
5. Material: environmentally friendly PP material
6. Product size: 7 x 6.3 x 1.2cm
7. Net weight: about 18g/piece

1. The WII to HDMI converter can output HDMI signals and connect directly to monitors/TVs/projectors! You can even connect WII directly to computer speakers and headphones without any power supply, plug and play;
2. Only one HDMI cable is needed to convert the WII signal into a digital audio and video signal and transmit it to a TV or monitor. Unlike previous converters, it uses a standard HDMI high-definition interface connection. Whether it is clarity, brightness or sharpness, it is incomparable to previous analog interfaces! Playing games is more comfortable!
3. Lightweight and portable, no driver installation is required, and the installation operation is simple.
4. Usage tips: Dont forget to input settings and change the resolution of WII games from 480p to 480i. They can only work on composite A/V lines. If you switch Wii to 480P mode, they may not work through HDMI compatibility (wii 480P is not supported)
5. Input interface: Wii input male head, USB power input.
6. Output interface: male HDMI compatible output
7. Weight: 54g

1. Material: silicone
2. For Flipper Zero
3. Real machine mold to ensure accurate fit with all holes
4. Will not block signals, nor interfere with charging and functions
5. Environmentally friendly silicone, safe and non-toxic, no fingerprints
6. Anti-drop protection rubber frame, can be washed in water
7. Size: 103x42x28 mm
8. Weight: about 28 grams

1. Material: silicone
2. For Flipper Zero
3. Real machine mold to ensure accurate fit with all holes
4. Will not block signals, nor interfere with charging and functions
5. Environmentally friendly silicone, safe and non-toxic, no fingerprints
6. Anti-drop protection rubber frame, can be washed in water
7. Size: 103x42x28 mm
8. Weight: about 28 grams

1. Material: silicone
2. For Flipper Zero
3. Real machine mold to ensure accurate fit with all holes
4. Will not block signals, nor interfere with charging and functions
5. Environmentally friendly silicone, safe and non-toxic, no fingerprints
6. Anti-drop protection rubber frame, can be washed in water
7. Size: 103x42x28 mm
8. Weight: about 28 grams

1. Full anti-fall protection, prevent the game console from being scratched and worn
2. Environmentally friendly TPU, skin-friendly feel, shock-resistant cushioning
3. Curved grip design, comfortable hand feel
4. Precise hole positioning, unobstructed key ports, and effective heat dissipation
5. Soft material, easy to disassemble and assemble, does not damage the game console
6. Bracket design, stable and practical, freeing your hands

1. Support 4K HD output: This video game console uses an HD output interface instead of a USB interface. You can plug it into a TV, computer monitor, or projector with an HD output interface to bring you a 4K HD display
2. 2.4G dual wireless game controller: Dual wireless game controller, is simple and convenient, so you can experience the fun of games with friends, partners, and children (The handle is powered by 2 No. 7 batteries, and you need to bring your own)
3. Amlogic S905X3 quad-core chip, lossless transmission of images
4. Support 45+ emulators, suitable for SP/PS/N64/MAME/NEOGEO/SEGA/CP/GB/SFCSNES/3DS/NES/GBA ECT, etc., support users to download games in related formats
5. Arcade-specific game joystick, high sensitivity, and anti-slip design.
6. Support more large-scale 3D games.

Parameters:
1. Model: X9 Ultra
2. CPU: Amlogic S905X3 64-bit quad-core ARM Cortex A55
3. Memory: DDR3: 2GB
4. Operating system: Emuelec 4.3
Games: 64G: 37000+ supports 45 simulators, 128G: 42000+ supports 46 simulators, 256G: 60000+ supports 64 simulators
5. Power supply: DC 5V/1A
6. Output interface: HDMI output, 1080P, 720P
7. Game language: English

Packing list:
Game console x 1
Game controller x 2
Receiver x 1
HDMI cable x 1
Power cable x 1
User manual x 1

1. Amlogic S905 quad-core chip, lossless image transmission
2. System: Emuelec4.3
3. Support more than 40 emulators, suitable for PSP/PS1/N64/FC/CP1/CP2/CP3/FCE/Neogeo/GBA/MAME/GB/GBA/MDNGPC/SFC/MEGADRIVE/GAMEGEAR/SEGAGENESIS/SG-1000, etc., support users to download games in related formats
4. Support more large 3D games.
5. Function: With search function, collection function, game progress saving function
6. HD output supports HD 4K: maximum output 60FPS, HD 2.1D output 1280 x 720 resolution
7. Language: Game language English, system operation language more than 20 (English/Korean/Russian/Spanish/Portuguese/French/Arabic)
8. Wireless controller: 2.4G wireless controller supports 1-2 players, free from the restriction of cables, free game (handle is powered by 2 No. 7 batteries, not include)
9. ??Support external TF card, expandable to 256GB
10. Main control frequency: S905 quad-core CORTEX-A55 up to 1.8GHZ
11. Memory performance: LPDDR3 1G
12. Voltage input: 5V 2A

1. Input parameters: 5V 2A
2. Output parameters: 11.1V 2A
3. Functional features: strong versatility, LED indication, overcharge protection, overvoltage protection
4. Built-in intelligent load identification chip to block excessive current and voltage, prevent overcharge, overvoltage, overload, and protect equipment from damage
5. When the charging cable charges the 11.1V lithium battery pack, it can be connected to computer equipment, mobile phone adapters, and mobile power supplies for charging
6. LED light prompt function, the red and green lights are always on when fully charged
7. The charging current is gradually reduced according to the increase in battery charging power. When the battery voltage is charged to 12.6V, the current will be automatically shut down and charging will be stopped to prevent battery overcharge and damage
8. Aluminum alloy USB interface, corrosion-resistant and anti-oxidation, safer
9. The XH-4P charging end female plug connected to the battery is connected to the battery end male plug, with a snap-on design, no leakage when charging, safe and tight
10. Net weight: 26g
11. Cable length: 56cm (including plug)

1. Output current: 3 x 800mA
2. Rated power: 10w
3. Input parameters: 100-240V
4. Applicable: 18650 Battery
5. Size: 92x57.5x35mm
6. Cable length: 60cm
7. Net weight: 89g

Features:
1. Intelligent current diversion, two channels can be charged simultaneously:
- When a 7.4V lithium battery is inserted into the XH-3P (three-pin) port for charging, cell1 and cell2 light up red, indicating that they are charging
- When a 11.1V lithium battery is inserted into the XH-4P (four-pin) port for charging, the three lights of cell1/2/3 all light up red, and the two channels are charged simultaneously without interfering with each other
2. Built-in intelligent load identification chip, blocking excessive current and voltage, preventing overcharging, overvoltage, overload, and protecting equipment from damage
3. Aluminum alloy plug, anti-oxidation, corrosion-resistant, safer
4. The XH-3P and XH-4P charging end female plugs connected to the battery are connected to the battery end male plug, snap-on design, no leakage during charging, safe and tight
5. Gradually reduce the charging current according to the increase in battery charging power. When the battery voltage reaches 8.4V and 12.6V, it will automatically shut off the current and stop charging to prevent battery overcharging and damage
6. Suitable for charging 7.4V and 11.1V lithium batteries
7. Can charge a 7.4V lithium battery and a 11.1V lithium battery at the same time, with independent channel control, set overcharge protection/LED indication

1. Wireless design, get rid of the trouble of wires, make the game more interesting.
2. The controller back button attachment can help young players use the controller more conveniently, making the game more enjoyable.
3. The controller back button attachment is compatible with 80% of the controllers on the market (suitable for PS4 controllers, some custom controllers are not applicable)
4. The controller attachment can easily map the buttons on the controller to the back buttons, with TURBO burst function
5. Plug and play, quick installation

Features:
1. Supports high-precision mouse and keyboard gaming experience on Xbox One, Xbox Series X/S, PlayStation 4, PlayStation 5, and Nintendo Switch
2. Lightweight, flexible and easy to use, it can provide 1:1 gaming accuracy and always performs consistently in every game you play
3. Built-in counterweight and silicone foot pad design, the game is placed more firmly
4. The 3 USB-A ports on the front are double-sided, plug-and-play, and easy to use
5. Connection method: wired connection
6. Applicable platforms: PS4 / PS5 / Xbox One / Xbox X/S / Nintendo Switch, etc.
7. Dedicated/auxiliary APP: Chicken Game World APP
8. Bluetooth: BT5.0

1. Pre load legal Window 11 operating system.
2. AMD Ryzen 7 8840U CPU, 8 cores 16 threads, high performance, run fast, and operate smoothly.
3. LPDDR5X 32GB/64GB RAM + 1TB/2TB/4TB SSD ROM
4. 10.95 inch 2560x1600 pixel IPS screen, 10 points touch support, high clear and vivid color.
5. Harman certified speakers, Wi-Fi6E 802.11ax, BT5.2
6. Powered by 16890mAh high capacity battery, support 100W GAN PD fast charger.
7. Languages Support: Simplified Chinese, Traditional Chinese, Japanese, French, German, Italian, Spanish, Portuguese, Russian, English, Swedish, Polish, Greek, Turkish, Korean, Dutch, Spanish, Portuguese, Ukrainian
8. Size: 252x163x13mm
9. Weight: 789g

1. Compatible with EasySMX controller, also suitable for PS4/PS5/Xbox/Switch/Switch Pro controller
2. Highly durable fabric with high abrasion resistance and scratch resistance
3. Shockproof layer protects internal objects from damage
4. Soft facecloth lining for intimate protection
5. Soft rubber carrying handle for comfortable hand feeling
6. Inside mesh pocket for organizing data cables and other small items
7. Double metal zipper, smooth and durable
8. Size: about 17 x 13cm
9. Description: only the organizer bag, does not include other items in the picture

1. Applicable to Sony PS5 Slim optical drive version/digital version console.
2. The rubber pad design at the bottom of the stand provides excellent anti-slip and tilt protection.
3. Helps dissipate the heat generated by the PS5 slim console more effectively, extending the life of the console by promoting better airflow.
4. Designed to hold the PS5 ultra-thin game console securely in an upright position, saving space and allowing easy storage
5. The colorful version has 14 lighting modes to adjust (9 static modes and 5 dynamic modes). You can change different lighting modes by pressing the touch switch to enhance the atmosphere of the game.
6. Simple assembly and easy to use.
7. Note: Only the bracket will be shipped, nothing else!

1. This product is used with P5 Slim digital version and optical drive version host.
2. Use left and right combined bases to save space and facilitate storage.
3. Streamlined appearance design, beautiful and elegant.
4. Equipped with 4 USB 2.0 ports, the USB port with charging logo supports fast charging of the handle (supports data transmission)
5. The USB port with charging logo supports fast charging of the handle.
6. Equipped with 14 RGB lighting effects.
7. Suspended design, airflow passes through from the bottom, and the heat dissipation effect is good.

Product parameters:
1. Input: 5V/2A
2. Output: 5V/1.8A
3. USB expansion port 1 rated output current: 1A
4. USB expansion port 2, 3, 4 rated output current: 200mA
5. Note: Only the bracket will be shipped, nothing else!

1. Small size, large storage (32 sheets), easy to access
2. Can be hung on the wall, space saving
3. Silicone anti-slip pads on the bottom, effectively protect the desktop
4. Widely compatible with multi-flat game disks
5. Wide and narrow socket design, suitable for a variety of thickness of discs
6. Material: ABS, acrylic
7. Size: about 15 x 15 x 21.8cm
8. Description: only the storage bracket, does not include other items in the picture

Product Name:SpeedyBee F405 V3 30x30 Flight Controller
MCU:STM32F405
IMU(Gyro):BMI270
USB Port Type:Type-C
Barometer:Built-in
OSD Chip:AT7456E chip
BLE Bluetooth:Supported. Used for Flight Controller configuration
DJI Air Unit Connection Way:Two ways supported: 6-pin connector or direct soldering.
Blackbox MicroSD Card Slot:Supported. Please use ≤4GB SDSC/SDHC microSD card and should be formatted to FAT16/FAT32 format. Don't use SDXC cards. Note: Betaflight can only recognize 4GB max.
BetaFlight Camera Control Pad：Yes(CC pad on the front side)
Current Sensor Input：Supported. For SpeedyBee BLS 50A ESC, please set scale equal 386 and Offset equal 0.
Power Input:3S-6S Lipo(Through G, BAT pins/pads from the 8-pin connector or 8-pads on the bottom side)
5V Output:9 groups of 5V output, four +5V pads and 1 BZ+ pad( used for Buzzer) on front side,and 4x LED 5V pads. The total current load is 2A.
9V Output:2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 2A.
3.3V Output:Supported. Designed for 3.3V-input receivers. Up to 500mA current load.
4.5V Output:Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
ESC Signal:M1- M4 on bottom side and M5-M8 on front side.
UART:5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6)
ESC Telemetry UART：R4(UART4)
I2C:Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc.
Traditional Betaflight LED Pad:Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware.
Buzzer:BZ+ and BZ- pad used for 5V Buzzer
RSSI Input: Supported. Named as RS on the front side.
SmartPort: Not supported
Supported Flight Controller Firmware: BetaFlight(Default), EMUFlight, INAV
Firmware Target Name: SPEEDYBEEF405V3
Mounting: 30.5 x 30.5mm( 4mm hole diameter)
Dimension: 41.6(L) x 39.4(W) x 7.8(H)mm
Weight: 9.6g

Product Name: SpeedyBee BLS 50A 30x30 4-in-1 ESC
Firmware: BLHeli_S JH50
Wireless Configuration: Full Configuration Supported in the SpeedyBee app
Continuous Current: 50A x 4
Burst Current: 55A(5S)
TVS Protective diode:Yes
External Capacitor: 1000uF Low ESR Capacitor(In the package)
ESC Protocol: DSHOT300/600
Power InputL 3-6S LiPo
Power Output: VBAT
Current Sensor: Support (Scale=386 Offset=0)
Mounting: 30.5 x 30.5mm( 4mm hole diameter)
Dimension: 45.6(L) x 44(W) x 6.1mm(H)
Weight: 13.8g

1. Compatible with PS5 Slim digital version / CD-ROM version
2. Used for heat dissipation to prevent the console from overheating during gameplay
3. Intelligent temperature sensing function, can automatically adjust the air speed according to the temperature of the console
4. 3 speeds adjustable, cooling more efficiently
5. With colorful RGB lighting effects, colorful atmosphere to enhance the gaming experience
6. Equipped with one USB3.0 expansion port and one USB2.0 expansion port
7. Description: only cooling fan, not include other items in the picture

1. The game console uses Unisoc T820 processor, 6nm EUV 5G SOC chip, 8-core 1xA76 2.7GHz+3 x A76 2.3GHz+4 x A55 2.1GHz, providing a smooth and responsive gaming experience.
2. Support Android games, PS2, WII, NGC, 3DS, PSP, DC, SS, PS1, NDS, N64, CPS1, CPS2, CPS3, FBA, NEOGEO, GBA, GBC, GB, SFC, FC, MD, SMS, MSX, PCE, WSC and other format games. Support users to download games in related formats
3. Ergonomically designed, the arc of the grip fits the palm of your hand, so you won’t feel tired after playing for a long time.
4. Supports 5G Wifi online sparring, WIFI screen projection, DP output (1080P), Bluetooth connection to TV, and immersed in the big screen experience (Note: DP output requires a data cable with DP function)
5. Other functions: built-in Hall rocker, six-axis gyro sensor, Hall trigger, high-speed fan + heat pipe active cooling, supports FOTA wireless upgrade, wifi multiplayer gaming, streaming, wireless screen mirroring, USB Type-C Supports 1080p DisplayPort output and vibration motor
6. Supports the display and freedom of various functional attributes such as 3.5mm stereo headphones, energy-saving settings, rocker light control, display brightness, etc.

Specification:
1. Display: 5.48-inch AMOLED screen, OCA fully laminated, 1080 x 1920
2. CPU: Unisoc T820 processor, 6nm EUV 5G SOC chip
3. GPU: Quad-core MaLi-G57 850MHz RAM 8GB LPDDR4X
4. Storage: 128G UFS2.2
5. System: Android 13
6. WiFi/Bluetooth: 2.4/5G WIFI 802.11a/b/g/n/ac, Bluetooth 5.0
7. Supported languages: Japanese, French, German, Italian, Spanish, Portuguese, Russian, English, Polish, Korean, Dutch, Latin American Spanish, Brazilian Portuguese, Simplified Chinese, Traditional Chinese
8. External amplifier function: high-fidelity dual speakers
9. TF card: supports TF card expansion, up to 2TB
10. Battery: Polymer lithium battery 5500mAH, battery life 8 hours, charging 5V/2A, fully charged in 3.5h
11. Dimensions: 22.3 x 9 x 1.5cm
12. Weight: 0.331kg

Packing list: game console, USB charging cable, color box, manual, tempered film

1. Material: silicone
2. Applicable models: for XBox Series S / X gamepad
3. Soft silicone, skin-friendly texture, safe and non-toxic, not easy to be deformed
4. Full fit protection, non-slip grip particles, embossed texture, enhance the feel, massage palm
5. Anti-slip stripe design on the back, anti-slip and anti-sweat, enhance the feel of the hand, you can play games for a long time
6. Anti-dust, anti-sweat, anti-extrusion, improve product life, protect and beautify the appearance of the handle
7. Buttons/interfaces and other operating parts of the inlay processing, the installation does not affect the operation of the use of completely
8. Size: about 16 x 10.2 x 5.3 cm
9. Note: only the protective cover is shipped, nothing else is included

Notes:
1. Do not scratch the silicone sleeve with pointed objects to avoid damage to the product
2. Silicone case can be wiped with a clean cloth with water, do not use organic solvents for cleaning

1. Material: silicone
2. Applicable models: for PS5
3. Selected soft silicone, skin-friendly texture, safe and non-toxic, full fit protection
4. Grip anti-slip particles, embossed texture, enhance the feel, massage palm
5. Anti-slip stripe design on the back, anti-slip and anti-sweat, enhance the feel of the hand, you can play games for a long time
6. Anti-dust, anti-sweat, anti-extrusion, improve product life, protect and beautify the appearance of the handle
7. Buttons/interfaces and other operating parts of the inlay processing, the installation does not affect the operation of the use of completely
8. Size: about 16 x 10.2 x 5.3 cm
9. Note: only the protective cover is shipped, nothing else is included

Notes:
1. Do not scratch the silicone sleeve with sharped objects, so as not to cause damage to the product
2. Silicone case can be wiped with a clean cloth with water, do not use organic solvents for cleaning

1. Gear material: metal
2. Working voltage: 4.8V-6.0V
3. Operating current: 200mA/60o
4. Plug standard: Futaba/JR universal
5. Torque: 1.5/1.8 kg.cm (4.8V/6V)
6. Speed: 0.12sec/60o at 4.8V, 0.10sec/60o at 6V
7. Suitable for fixed wing, 450 helicopter, robot, super smooth
8. Weight: about 12 g
9. Size: about 3.2 x 1.15 x 2.4 cm, cable length about 25 cm
10. Packing list: ES08MA servo x 1, servo rocker set 86 x 1

1. Humanized safety design away from the water switch, can prevent the rotating piece of power after accidentally injuring the fingers, holding in the hand can not be used, automatically open after the water
2. 2.4G wireless frequency, anti-interference more stable, more sensitive
3. The waterline hull effectively reduces the resistance in sailing, improves the speed, and prevents the water from entering the interior
4. With USB charging cable, convenient and fast charging
5. Sealed waterproof structure, refuse water leakage and short circuit, before playing, the waterproof soft rubber on the top of the boat to plug the charging port, to avoid the boat into the water
6. Strong output equipped with dual pulp and dual motor power, a stronger sense of experience
7. Mini size, easy to carry, play without site restrictions

Parameters:
1. Material: plastic
2. Remote control mode: handle
3. Control distance: about 20 meters
4. Continuity time: about 12 minutes; charging time: about 15 minutes
5. Battery capacity: 100mAh
6. Remote control battery: AAA battery x 3 (not included in shipment)
7. Size: 11.5 x 3 x 2.3cm

Packing list:
- Remote control boat x 1
- Remote control handle x 1
- USB charging cable x 1
- Instruction manual x 1

1. Ultra-thin and excellent flexibility. The screen is thick. You do not need to worry whether the reflexes of your device would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your device well and make a big difference on protecting your device from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Convenient for use. To paste the film, the only thing you need to do is to clean up the screen thoroughly.
6. Durable. With good performance and high quality, it may work for a long time.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. Using excessive force who installing or removing the screen protector may damage the product.

1. Ultra-thin and excellent flexibility. The screen is thick. You do not need to worry whether the reflexes of your device would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it more safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your device well and make a big difference on protecting your device from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Convenient for use. To paste the film, the only thing you need to do is to clean up the screen thoroughly.
6. Durable. With good performance and high quality, it may work for a long time.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. Using excessive force who installing or removing the screen protector may damage the product.

1. Material: waterproof PEVA
2. Applicable age: 3 years old and above
3. Power supply: 3 x AA batteries (not included)
4. Function: battery operated, sound, interactive
5. Weight: about 764 g
6. Size: about 100 x 87 cm
7. Suggestions for use: do not pick up the switch position directly when you put it on, to avoid causing the keys to shift contact failure

Features:
1. Foot-operated piano pad, early education and physical exercise integration, piano keys sensitive, clear sound quality, no noise, soft and not harsh, the children play happily and enjoy themselves
2. Strictly selected materials, fine workmanship, smooth treatment, no burrs and edges, the bottom of the non-slip strip to ensure that the play will not slip, can be wiped with a damp cloth, easy to clean
3. The dance mat is made of PEVA environmentally friendly material, safe and environmentally friendly, durable, strong load-bearing capacity, multi-player, parent-child interaction, cultivate feelings
4. Portable and easy to use, music game mat can be folded, compact size, no need to connect to the TV, battery-powered, you can start the game, play more convenient
5. The game dance mat can help children develop intellectual skills, memory, self-confidence, patience, social skills and creativity, and also improve their foot-eye coordination
6. Dance on the flashing arrows, touching them with your hands and feet when multiple lights are on, and follow the beat of the built-in music to improve your child coordination skills
7. Multiple game modes, 5 built-in game modes with indicator lights and LED scoreboard, modes 1-3 provide different levels of dance challenges, mode 4 is music play mode, mode 5 is piano keyboard mode where you can create your own music
8. This unique gift is perfect for both girls and boys and is the ideal toy for Children Day, Easter, Halloween, Thanksgiving, Christmas, New Year and other holidays

1. For GiiKER Puzzle Game Travel case, the perfect Brain teaser console to carry and store your GiiKER puzzle games and accessories.
2. Maximum protection - Replace the hard shell of the GiiKER Slide Brain Game Console protector to secure your equipment and accessories. The shell can effectively absorb shocks, reduce damage caused by accidental collisions, make your equipment without scratches, and ensure that your equipment is in good condition. Make it safe and easy for your players to store and carry all accessories wherever they are.
3. GiiKER Interactive Handheld game boxs ultra-portable and entertaining - console organizer, mesh pocket suitable for storage of sliding tiles, built-in elastic strap can hold the game console, each easy to put in and out of its box for GiiKER Learning game box.
4. Made of high quality EVA material, with strong zipper and hand strap, portable. The gray shell and orange zipper will give you a better game experience.
5. Convenient design: The steel hook makes your equipment convenient, lightweight and convenient for going out or traveling. Equipped with special mesh pockets, other accessories, smooth and sturdy double zippers, easy to open and close, giving you a better use experience.

1. Suitable for charging PS Portal game console
2. It has 14 RGB lighting effects. The buttons on the back of the product can turn the lights on or off or switch the lighting effects.
3. Equipped with a charging indicator light to easily identify the charging status during the charging process
4. Product size: 16 x 8.5 x 6.5cm
5. Product weight: 70g