1. TTL Auto Flash: TTL
2. Manual flash: Yes
3. High-speed synchronization: Yes
4. Rear Curtain Sync: Yes
5. FE Lock: Yes
6. Focus Assist: Yes
7. Modeling light: Control the modeling light by triggering the flash
8. Buzzer: Control the buzzer by triggering the flash
9. Wireless settings: The receiver can control the camera to shoot through the 2.5mm sync cable jack
10. ZOOM setting: Adjust the ZOOM value through the transmitter
11. TCM function: Convert the TTL shot value to the output value of the M node
12. Firmware upgrade: Upgrade via Type-C USB port
13. Memory function: Save the settings after 2 seconds of quick operation, and restore after restarting
14. Transmission range: About 0-100m
15. Built-in wireless: 2.4G
16. Modulation method: MSK
17. Channel: 32
18. Wireless ID: 01-99
19. Number of groups: 16
20. For FUJIFILM cameras
21. Power supply: AA battery x 2 (not included)

Features
1. Brand new and high quality.
2. It provides timer function: delay time, exposure time, interval, and number of shots for timed interval.
3. Photography quick set, easy to use.
4. High-quality ABS, have a Long lasting.
5. Large LCD screen, easy to read.
6. Build in speaker and LED release lamp.
7. This timing control shutter with background light, at night or some place so dark you can use it as usual.
8. You can take star trail and car flow photo very easy using this timing control shutter.

About the product
1. Timer delay: 0 s to 99 hrs 59min 59s in one-second increments
2. Exposure time: 0 s to 99 hrs 59min 59s in one-second increments
3. Interval: 1 s to 99 hrs 59min 59s in one-second increments
4. Number of shots: 1 to 399, - - (unlimited)
5. Power source: 2 x AAA 1.5V Lr03 alkaline batteries (batteries are not included).
6. Battery life: Approximately two months of continuous shooting with a delay of 5 min, an exposure time of 4 min 56s, and an interval of 5min. User of the illuminator will reduce battery life.
7. N8 Cable Compatible Camera:
- Suitable for NIKON: D3X/D3/D700/D300/D2X/D2H/D200/D1H/D1X/D800.

Features
1. Brand new and high quality.
2. It provides timer function: delay time, exposure time, interval, and number of shots for timed interval.
3. Photography quick set, easy to use.
4. High-quality ABS, have a Long lasting.
5. Large LCD screen, easy to read.
6. Build in speaker and LED release lamp.
7. This timing control shutter with background light, at night or some place so dark you can use it as usual.
8. You can take star trail and car flow photo very easy using this timing control shutter.

About the product
1. Timer delay: 0 s to 99 hrs 59min 59s in one-second increments
2. Exposure time: 0 s to 99 hrs 59min 59s in one-second increments
3. Interval: 1 s to 99 hrs 59min 59s in one-second increments
4. Number of shots: 1 to 399, - - (unlimited)
5. Power source: 2 x AAA 1.5V Lr03 alkaline batteries (batteries are not included).
6. Battery life: Approximately two months of continuous shooting with a delay of 5 min, an exposure time of 4 min 56s, and an interval of 5min. User of the illuminator will reduce battery life.
7. C8 Cable Compatible Camera:
- Suitable for CANON: 1D/1DS/EOS5D/50D/40D/30D/20D/10D/5D/5D MARK II/7D.

1. TTL Auto Flash: TTL
2. Manual flash: Yes
3. High-speed synchronization: Yes
4. Rear Curtain Sync: Yes
5. FE Lock: Yes
6. Focus Assist: Yes
7. Modeling light: Control the modeling light by triggering the flash
8. Buzzer: Control the buzzer by triggering the flash
9. Wireless settings: The receiver can control the camera to shoot through the 2.5mm sync cable jack
10. ZOOM setting: Adjust the ZOOM value through the transmitter
11. TCM function: Convert the TTL shot value to the output value of the M node
12. Firmware upgrade: Upgrade via Type-C USB port
13. Memory function: Save the settings after 2 seconds of quick operation, and restore after restarting
14. Transmission range: About 0-100m
15. Built-in wireless: 2.4G
16. Modulation method: MSK
17. Channel: 32
18. Wireless ID: 01-99
19. Number of groups: 16
20. For Sony cameras
21. Power supply: AA battery x 2 (not included)

1. TTL Auto Flash: TTL
2. Manual flash: Yes
3. High-speed synchronization: Yes
4. Rear Curtain Sync: Yes
5. FE Lock: Yes
6. Focus Assist: Yes
7. Modeling light: Control the modeling light by triggering the flash
8. Buzzer: Control the buzzer by triggering the flash
9. Wireless settings: The receiver can control the camera to shoot through the 2.5mm sync cable jack
10. ZOOM setting: Adjust the ZOOM value through the transmitter
11. TCM function: Convert the TTL shot value to the output value of the M node
12. Firmware upgrade: Upgrade via Type-C USB port
13. Memory function: Save the settings after 2 seconds of quick operation, and restore after restarting
14. Transmission range: About 0-100m
15. Built-in wireless: 2.4G
16. Modulation method: MSK
17. Channel: 32
18. Wireless ID: 01-99
19. Number of groups: 16
20. For Nikon cameras
21. Power supply: AA battery x 2 (not included)

1. TTL Auto Flash: TTL
2. Manual flash: Yes
3. High-speed synchronization: Yes
4. Rear Curtain Sync: Yes
5. FE Lock: Yes
6. Focus Assist: Yes
7. Modeling light: Control the modeling light by triggering the flash
8. Buzzer: Control the buzzer by triggering the flash
9. Wireless settings: The receiver can control the camera to shoot through the 2.5mm sync cable jack
10. ZOOM setting: Adjust the ZOOM value through the transmitter
11. TCM function: Convert the TTL shot value to the output value of the M node
12. Firmware upgrade: Upgrade via Type-C USB port
13. Memory function: Save the settings after 2 seconds of quick operation, and restore after restarting
14. Transmission range: About 0-100m
15. Built-in wireless: 2.4G
16. Modulation method: MSK
17. Channel: 32
18. Wireless ID: 01-99
19. Number of groups: 16
20. For Canon cameras
21. Power supply: AA battery x 2 (not included)

1. Model: X2T-P
2. Compatible cameras: For Pentax cameras (E-TTL II auto flash), can be used with cameras with PC sync socket
3. Compatible phones: For iPhone 6s, iPhone 6s Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus, iPhone 8, iPhone 6, iPhone 6 Plus, iPhone X; For Huawei P9, P10, P10 plus, P20, P20 pro , Mate 9pro, Mate 9, Mate 10pro, Mate 10; For Samsung Galaxy S8, Galaxy Note8, Galaxy S9
4. Power supply: AA battery x 2 (not included)
5. Flash exposure control
6. TTL autoflash: E-TTL II
7. Manual mode: Yes
8. Multi-flash mode: Yes
9. High-speed synchronization: Yes
10. Rear Curtain Sync: Yes
11. Flash Exposure Compensation: Yes, +/- stops in 1/3 steps
12. FE Lock: Yes
13. Focus Assist: Yes
14. Wireless shutter: The receiver can control the camera to shoot through the 3.5mm sync cable jack
15. Zoom setting: adjust the flash focus through the transmitter TCM function: Convert the shooting parameters in TTL mode to the values in manual mode
16. Firmware upgrade: Support program firmware upgrade via Type C usb cable. Memory function: The parameters will be memorized within 2 seconds after parameter setting, and the original data will be restored after restarting.
17. Transmission range (about) 0-100m
18. Built-in wireless system: 2.4GHz

1. Model: X2T-O
2. Compatible cameras: For Panasonic / Olympus cameras (E-TTL II auto flash), can be used with cameras with PC sync socket
3. Compatible phones: For iPhone 6s, iPhone 6s Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus, iPhone 8, iPhone 6, iPhone 6 Plus, iPhone X; For Huawei P9, P10, P10 plus, P20, P20 pro , Mate 9pro, Mate 9, Mate 10pro, Mate 10; For Samsung Galaxy S8, Galaxy Note8, Galaxy S9
4. Power supply: AA battery x 2 (not included)
5. Flash exposure control
6. TTL autoflash: E-TTL II
7. Manual mode: Yes
8. Multi-flash mode: Yes
9. High-speed synchronization: Yes
10. Rear Curtain Sync: Yes
11. Flash Exposure Compensation: Yes, +/- stops in 1/3 steps
12. FE Lock: Yes
13. Focus Assist: Yes
14. Wireless shutter: The receiver can control the camera to shoot through the 3.5mm sync cable jack
15. Zoom setting: adjust the flash focus through the transmitter TCM function: Convert the shooting parameters in TTL mode to the values in manual mode
16. Firmware upgrade: Support program firmware upgrade via Type C usb cable. Memory function: The parameters will be memorized within 2 seconds after parameter setting, and the original data will be restored after restarting.
17. Transmission range (about) 0-100m
18. Built-in wireless system: 2.4GHz

1. Model: X2T-S
2. Compatible cameras: For Sony cameras (E-TTL II auto flash), can be used with cameras with PC sync socket
3. Compatible phones: For iPhone 6s, iPhone 6s Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus, iPhone 8, iPhone 6, iPhone 6 Plus, iPhone X; For Huawei P9, P10, P10 plus, P20, P20 pro , Mate 9pro, Mate 9, Mate 10pro, Mate 10; For Samsung Galaxy S8, Galaxy Note8, Galaxy S9
4. Power supply: AA battery x 2 (not included)
5. Flash exposure control
6. TTL autoflash: E-TTL II
7. Manual mode: Yes
8. Multi-flash mode: Yes
9. High-speed synchronization: Yes
10. Rear Curtain Sync: Yes
11. Flash Exposure Compensation: Yes, +/- stops in 1/3 steps
12. FE Lock: Yes
13. Focus Assist: Yes
14. Wireless shutter: The receiver can control the camera to shoot through the 3.5mm sync cable jack
15. Zoom setting: adjust the flash focus through the transmitter TCM function: Convert the shooting parameters in TTL mode to the values in manual mode
16. Firmware upgrade: Support program firmware upgrade via Type C usb cable. Memory function: The parameters will be memorized within 2 seconds after parameter setting, and the original data will be restored after restarting.
17. Transmission range (about) 0-100m
18. Built-in wireless system: 2.4GHz

1. Model: X2T-N
2. Compatible cameras: For Nikon cameras (E-TTL II auto flash), can be used with cameras with PC sync socket
3. Compatible phones: For iPhone 6s, iPhone 6s Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus, iPhone 8, iPhone 6, iPhone 6 Plus, iPhone X; For Huawei P9, P10, P10 plus, P20, P20 pro , Mate 9pro, Mate 9, Mate 10pro, Mate 10; For Samsung Galaxy S8, Galaxy Note8, Galaxy S9
4. Power supply: AA battery x 2 (not included)
5. Flash exposure control
6. TTL autoflash: E-TTL II
7. Manual mode: Yes
8. Multi-flash mode: Yes
9. High-speed synchronization: Yes
10. Rear Curtain Sync: Yes
11. Flash Exposure Compensation: Yes, +/- stops in 1/3 steps
12. FE Lock: Yes
13. Focus Assist: Yes
14. Wireless shutter: The receiver can control the camera to shoot through the 3.5mm sync cable jack
15. Zoom setting: adjust the flash focus through the transmitter TCM function: Convert the shooting parameters in TTL mode to the values in manual mode
16. Firmware upgrade: Support program firmware upgrade via Type C usb cable. Memory function: The parameters will be memorized within 2 seconds after parameter setting, and the original data will be restored after restarting.
17. Transmission range (about) 0-100m
18. Built-in wireless system: 2.4GHz

1. Model: X2T-C
2. Compatible cameras: For Canon cameras (E-TTL II auto flash), can be used with cameras with PC sync socket
3. Compatible phones: For iPhone 6s, iPhone 6s Plus, iPhone 7 Plus, iPhone 7, iPhone 8 Plus, iPhone 8, iPhone 6, iPhone 6 Plus, iPhone X; For Huawei P9, P10, P10 plus, P20, P20 pro , Mate 9pro, Mate 9, Mate 10pro, Mate 10; For Samsung Galaxy S8, Galaxy Note8, Galaxy S9
4. Power supply: AA battery x 2 (not included)
5. Flash exposure control
6. TTL autoflash: E-TTL II
7. Manual mode: Yes
8. Multi-flash mode: Yes
9. High-speed synchronization: Yes
10. Rear Curtain Sync: Yes
11. Flash Exposure Compensation: Yes, +/- stops in 1/3 steps
12. FE Lock: Yes
13. Focus Assist: Yes
14. Wireless shutter: The receiver can control the camera to shoot through the 3.5mm sync cable jack
15. Zoom setting: adjust the flash focus through the transmitter TCM function: Convert the shooting parameters in TTL mode to the values in manual mode
16. Firmware upgrade: Support program firmware upgrade via Type C usb cable. Memory function: The parameters will be memorized within 2 seconds after parameter setting, and the original data will be restored after restarting.
17. Transmission range (about) 0-100m
18. Built-in wireless system: 2.4GHz
19. Packing list: Flash Trigger , instructions

Features:
1. Universal hot shoe interface
2. 433MHz transmit frequency, fast response and stable transmission
3. 16 channels, transmission distance up to 30m, no direction or angle restrictions
4. Sync speed up to 1/250 second
5. With a studio flash interface, it can wirelessly trigger a variety of studio flashes
6. Fast frequency modulation, convenient for photographers to shoot
7. Energy saving design, the transmitter uses 12V 23A battery, the receiver uses two AAA batteries (not included)
8. Comes with PC sync cable for cameras without hot shoe connection

Note: This trigger does not support TTL functionality.

Compatible With:
1. Suitable for Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
2. Suitable for Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX/EXII, 430EZ, 420EX, 420EZ, 380EX;
3. Suitable for Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
4. Suitable for Olympus FL-50, FL36;
5. Suitable for Sigma EF-500 DG Super, EF-500 DG ST, EF-430;
6. Suitable for Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
7. For Vivitar 285HV (Older Vivitar 285/283 are only for PC sync);
8. Other flash models with trigger voltage of 12V or lower

1. It is made of stretchable, tenacious, soft high quality natural silicone material.
2. Protect housing and keypad against scratching, scraping & abrasion, anti-vibration, moreover all function can be used freely.
3. Compact, light, and extremely durable design, lightweight, convenient to carry.
4. Internal soft design gives you a soft and comfortable touch.
5. Simple and easy to use, protect your camera and install on your tripod at the same time.
6. This silicone camera case fits for Fujifilm Instax mini 40 Camera.

1. It is made of stretchable, tenacious, soft high quality natural silicone material.
2. Protect housing and keypad against scratching, scraping & abrasion, anti-vibration, moreover all function can be used freely.
3. Compact, light, and extremely durable design, lightweight, convenient to carry.
4. Internal soft design gives you a soft and comfortable touch.
5. Simple and easy to use, protect your camera and install on your tripod at the same time.
6. This silicone camera case fits for Sony Cyber-Shot RX100 VII / RX100 M7 Digital SLR Camera.

1. High quality and durable PU leather material.
2. Compact, lightweight and extremely durable design.
3. Protect your digital camera from dust, finger prints, and scratches.
4. Internal soft design gives you a soft and comfortable touch.
5. Soft internal layer to protect the LCD screen from scratches and bumps.
6. With 1/4 inch screw at the bottom, connect your camera stable.
7. Compatible with Sony LCE-7C / Alpha 7C / A7C (28-60mm / 40.5mm Lens).

Features
1. GN58, 180mm, ISO 100, supports multiple flash modes: TTL/ M/ MULT/ S1 / S2 / Master/ Slave. Highly sensitive sensor supports far wireless triggering distance.
2. Multi-contact hot shoe. With high-speed synchronization function, it supports 1/8000s trigger on camera and off camera. In high speed sync mode, using aperture priority for filling light for the shot subject, make your shooting more comfortable.
3. 2.4G wireless master control and slave, there is no directionality, and it can be used to trigger and flash off the machine.
4. Suitable for canon camera wireless flash system, realize machine TTL, manual and frequency flash. 0.1-3s recycle time, supports high speed continuous shooting.
5. The rotatable LCD screen is clear for displaying multiple readings, the buttons and knob can help you to adjust various settings quickly and easily.
6. Using strobe, a series of flashes can be used to move multiple images of an object over a photograph.

Specifications
1. Material: Plastic
2. Flash Index: GN58 (180mm, ISO100)
3. TTL Mode: Compatible for Canon E-TTL
4. Flash Mode: TTL/ M/ MULT/ S1 / S2 / MASTER/ SLAVE
5. Zoom Mode: Auto zoom, manual zoom
6. Synchronization Mode: Front curtain synchronization, rear curtain synchronization, high-speed synchronization
7. Frequency Flash: Supports 1-199Hz
8. Flash Time: 1/200s-1/20000s
9. Color Temperature: 5600 K +/- 100 K
10. Call Back Time: 0.1-3s (power output 1/128-1/1)
11. Wireless Flash: Built-in 2.4G, MASTER mode, SLAVE mode, S1, S2
12. Manual Flash: 8-level light control (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128)
13. Flash Times: About 150-1500 times (different according to the battery, flash output 1/1-1/128, using 2800mAh battery)
14. Adjustable Angle: Tilting angle: -70 degree-90 degree; Panning angle: 0-360 degree
15. Focal Length Range: 18-180mm
16. Power Supply: 4 x AA alkaline batteries (Batteries not included)
17. Size: Approx. 7.5x6x20.5cm
18. Weight: 400g

Features
1. Professional, 8-pole foldable octagon softbox.
2. On-camera flash light mount type, width adjustable to suit most flashes.
3. Can be handheld, the handle is angle adjustable; Can be mounted on light stand.
4. Adopt superior fabrics with exquisite workmanship and fine crease resistance, reflective effect is better.
5. With white soft cloth, make light soft and even.
6. Comes with a portable carry bag.

Specifications
1. Shape: Octagon
2. Pole Quantity: 8
3. Frame material: Metal
4. Diameter: 55cm
5. Depth: 30cm
6. Fold length: 43.5cm
7. Mount Type: For On-camera Flash Light
8. Wight: 0.65kg

Features
1. Remote control speed: The speed range is 40-120 sec/rev.
2. Easy to use: Just plug it in 110V cord (included) and flip the switch. Single switch operation, continue to switch on and off until you get desired spin direction
3. 360 degree rotating: Can also be used to create 360 degree videos, widely used in display of plastic model in different gestures, window product display, photograph show, solid display, cube spin display and advertising, ideal for Exhibition, Event, Party, Wedding.
4. Widely application: Product display, like jewelry, digital product, shampoo, glass, and other collectibles, still life photography, Cake display, window shopping display, 360 degree product video, super stores, exhibitions, and so on.

Specification
1. Material: ABS
2. Voltage: 110-240V
3. Speed: 40-120 seconds / circle
4. Diameter: 60cm, height: 7cm
5. Load-bearing: More than 100kg
6. Weight: 3700g

Package List
1. Electric Turntable x 1
2. Power Cord x 1
3. Remote Control x 1
4. Manual x 1
5. Color Box x 1

Features
1. Remote control speed: The speed range is 40-120 sec/rev.
2. Easy to use: Just plug it in 110V cord (included) and flip the switch. Single switch operation, continue to switch on and off until you get desired spin direction
3. 360 degree rotating: Can also be used to create 360 degree videos, widely used in display of plastic model in different gestures, window product display, photograph show, solid display, cube spin display and advertising, ideal for Exhibition, Event, Party, Wedding.
4. Widely application: Product display, like jewelry, digital product, shampoo, glass, and other collectibles, still life photography, Cake display, window shopping display, 360 degree product video, super stores, exhibitions, and so on.

Specification
1. Material: ABS
2. Voltage: 110-240V
3. Speed: 40-120 seconds / circle
4. Diameter: 60cm, height: 7cm
5. Load-bearing: More than 100kg
6. Weight: 3700g

Package List
1. Electric Turntable x 1
2. Power Cord x 1
3. Remote Control x 1
4. Manual x 1
5. Background Panel x 5
6. Color Box x 1

Specification
1. Material: ABS
2. Voltage: 110-240V
3. Speed: 18 seconds / circle
4. Diameter: 22cm, height: 6cm
5. Load-bearing: 50kg
6. Weight: 1000g

Features
1. Remote control speed: The speed range is 18 sec/rev.
2. Easy to use: Just plug it in 110V cord (included) and flip the switch. Single switch operation, continue to switch on and off until you get desired spin direction
3. 360 degree rotating: Can also be used to create 360 degree videos, widely used in display of plastic model in different gestures, window product display, photograph show, solid display, cube spin display and advertising, ideal for Exhibition, Event, Party, Wedding.
4. Widely application: Product display, like jewelry, digital product, shampoo, glass, and other collectibles, still life photography, Cake display, window shopping display, 360 degree product video, super stores, exhibitions, and so on.

Package List
1. Electric Turntable x 1
2. Power Cord x 1
3. Remote Control x 1

Specification
1. Material: ABS
2. Voltage: 110-240V
3. Speed: 18 seconds / circle
4. Diameter: 22cm, height: 6cm
5. Load-bearing: 50kg
6. Weight: 1000g

Features
1. Remote control speed: The speed range is 18 sec/rev.
2. Easy to use: Just plug it in 110V cord (included) and flip the switch. Single switch operation, continue to switch on and off until you get desired spin direction
3. 360 degree rotating: Can also be used to create 360 degree videos, widely used in display of plastic model in different gestures, window product display, photograph show, solid display, cube spin display and advertising, ideal for Exhibition, Event, Party, Wedding.
4. Widely application: Product display, like jewelry, digital product, shampoo, glass, and other collectibles, still life photography, Cake display, window shopping display, 360 degree product video, super stores, exhibitions, and so on.

Package List
1. Electric Turntable x 1
2. Power Cord x 1
3. Remote Control x 1

Features
1. Remote control speed: The speed range is 30 sec/rev.
2. Easy to use: Just plug it in 110V cord (included) and flip the switch. Single switch operation, continue to switch on and off until you get desired spin direction
3. 360 degree rotating: Can also be used to create 360 degree videos, widely used in display of plastic model in different gestures, window product display, photograph show, solid display, cube spin display and advertising, ideal for Exhibition, Event, Party, Wedding.
4. Widely application: Product display, like jewelry, digital product, shampoo, glass, and other collectibles, still life photography, Cake display, window shopping display, 360 degree product video, super stores, exhibitions, and so on.

Specification
1. Material: ABS
2. Voltage: 110-240V
3. Speed: 30 seconds / circle
4. Diameter: 42cm, height: 6cm
5. Load-bearing: 100kg
6. Weight: 2000g

Package List
1. Electric Turntable x 1
2. Power Cord x 1
3. Remote Control x 1

Features
1. Remote control speed: The speed range is 30 sec/rev.
2. Easy to use: Just plug it in 110V cord (included) and flip the switch. Single switch operation, continue to switch on and off until you get desired spin direction
3. 360 degree rotating: Can also be used to create 360 degree videos, widely used in display of plastic model in different gestures, window product display, photograph show, solid display, cube spin display and advertising, ideal for Exhibition, Event, Party, Wedding.
4. Widely application: Product display, like jewelry, digital product, shampoo, glass, and other collectibles, still life photography, Cake display, window shopping display, 360 degree product video, super stores, exhibitions, and so on.

Specification
1. Material: ABS
2. Voltage: 110-240V
3. Speed: 30 seconds / circle
4. Diameter: 42cm, height: 6cm
5. Load-bearing: 100kg
6. Weight: 2000g

Package List
1. Electric Turntable x 1
2. Power Cord x 1
3. Remote Control x 1

1. Good quality and very durable PU material.
2. Compact, light and extremely durable design.
3. Protect your digital camera from dust, fingerprints and scratches.
4. The inner soft design makes it feel soft and comfortable.
5. Additional adjustable long shoulder straps are buckled on both sides for easy carrying.
6. Suitable for Fujifilm Instax Square SQ1 camera

1. Good quality and very durable PU material.
2. Compact, light and extremely durable design.
3. Protect your digital camera from dust, fingerprints and scratches.
4. The inner soft design makes it feel soft and comfortable.
5. Additional adjustable long shoulder straps are buckled on both sides for easy carrying.
6. Suitable for Fujifilm Instax mini 7+ camera

1. Good quality and very durable PU material.
2. Compact, light and extremely durable design.
3. Protect your digital camera from dust, fingerprints and scratches.
4. The inner soft design makes it feel soft and comfortable.
5. Additional adjustable long shoulder straps are buckled on both sides for easy carrying.
6. Suitable for Fujifilm Instax mini 7+ camera

1. Good quality and very durable PU material.
2. Compact, light and extremely durable design.
3. Protect your digital camera from dust, fingerprints and scratches.
4. The inner soft design makes it feel soft and comfortable.
5. Additional adjustable long shoulder straps are buckled on both sides for easy carrying.
6. Suitable for Fujifilm Instax mini liplay camera.

1. High-quality and durable PU material.
2. Compact, light and extremely durable design.
3. Protect your digital camera from dust, fingerprints and scratches.
4. The inner soft design makes it feel soft and comfortable.
5. Additional adjustable long shoulder straps are buckled on both sides for easy carrying.
6. Suitable for Fujifilm Instax mini40 Instant camera

1. The transparent crystal integrated protective shell provides all-round protection.
2. Compact, light and extremely durable design.
3. Provide strong protection for your camera against dust, scratches and damage.
4. There is no need to take the camera out of the case when taking pictures.
5. The detachable shoulder strap is adjustable, which is more convenient and easy to hang and carry.
6. Suitable for Fujifilm Instax mini 11.

1. PVC material, transparent crystal integrated protective shell, provide all-round protection.
2. Compact, light and extremely durable design.
3. Provide strong protection for your camera against dust, scratches and damage.
4. There is no need to take the camera out of the case when taking pictures.
5. The detachable shoulder strap is adjustable, which is more convenient and easy to hang and carry.
6. Suitable for Fujifilm Instax mini 11/9/8

Features
1. Mobile APP control, support Android, iOS download.
2. Freely choose AB point to position and shoot.
3. Support video automatic loop shooting without frequent operation.
4. Support time-lapse photography shooting, parameter custom selection.
5. Can shoot in straight or curved lines.
6. It can be used in combination with a ball head to shoot at low pitches and multiple angles.
7. Built-in lithium battery, support Type-C interface charging.
8. The power is displayed in real time, and the speed is adjustable from 0-100.
9. Using stepping motor, precise control, low noise.
10. With a load-bearing capacity of 3KG, it supports mobile phones, micro-single cameras, video recorders, etc., and there are no restrictions on models.
11. APP shutter button, supports most of the micro single button to take pictures

Specifications
1. Weight: 3KG
2. Battery life: 3h
3. Body battery charging time: About 1.5h
4. Built-in battery capacity: 1800mAh
5. Speed: Up to 7.8cm/s
6. Speed can be adjusted, 0-100 percent optional
7. APP remote control distance: Up to 8m (without interference)

Package List
1. Smart car x 1
2. Manual x 1
3. TYPE-C charging cable x 1
4. Hex wrench x 1
5. Rubber ring x 1
6. Mutual screw x 1