Products

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

Cylindrical Display Stand Digital Security System Burglar Alarm / Anti - theft Alarm with Password Remote Control for iPhone & iPod & iPad with 8 Pin Port - Trustpick

Trustpick

Cylindrical Display Stand Digital Security System Burglar Alarm / Anti-theft Alarm with Password Remote Control for iPhone & iPod & iPad with 8 Pin Port, Cylindrical

70.00 ILS 89.00 ILS

-21%

In stock

Receives in 7 days.

Cylindrical Display Stand Security System Burglar Alarm / Anti - theft Alarm Display Holder with Infrared Remote Control for Mobile Phones with Type - C / USB - C Port - Trustpick

Trustpick

Cylindrical Display Stand Security System Burglar Alarm / Anti-theft Alarm Display Holder with Infrared Remote Control for Mobile Phones with Type-C / USB-C Port, ABS Cylindrical Type-C

68.00 ILS 86.00 ILS

-21%

Operation Steps
1. The power cable & security stand will connected, and cable line can be go throgh the side groove or bottom.
2. Tear off the bottom sticker, then install it tightly on the clean table(Press time within 10 seconds).
3. Insert the touch sensor cable into the back interface.
4. Tear off the sticker with touch sensor.
5. Paste on the phone back with touch sensor,then it will connected the power adator with security stand.
6. Connect the charging cable with mobile phone, it is successful to install the security stand when you hear a alarm sound.

Features
1. Security system is used to secure consumer electronic gadgets in exhibition or store open display against theft. This innovative system is easy to operate and is able to blend easily in any exhibits layout.
2. Charging function: The stand alone security device built in lithium battery, if the power outages that is also with security function. One set of external 5V power adapter, and it can be supply products for charging.
3. Alarming function:
- Contactor alarm: When we pull up the contactor and back of parts VBH adhesive, then it will immediately issued warming sound.
- Cutting cable alarm: When the alarm cable was pulled apart or cut off, then it will immediately issued warming sound.
4. Remote control function: The infrared remote control, anti-interference ability, sensitivity strong.
5. Material: ABS
6. Alarm volume: 95-120dB
7. Input voltage: 110-240V
8. Charging voltage: DC 5V 1A
9. Unlock: Infrared remote control
10. Size: 7.5x5x5cm

Specification:

General

Compatible with

Samsung: Galaxy A72 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S21 5G, Galaxy A02s, Galaxy S20 FE 5G, Galaxy M31s, Galaxy Note20 5G, Galaxy A71s 5G UW, Galaxy M01, Galaxy S20+ 5G, Galaxy S20 Ultra 5G, Galaxy S20 5G, Galaxy S20 Ultra

Huawei: nova 8 5G, Mate 30E Pro 5G, Mate 40 RS Porsche Design, Mate 40 Pro, P40 Pro+, P40 lite E, P40, Mate 30, P20 lite (2019), P30 Lite, P20 Pro, P20, Honor 4C

Honor: 30S, V30, 20 Pro

Package Weight

One Package Weight

0.26kgs / 0.56lb

One Package Size

14cm * 12cm * 9cm / 5.51inch * 4.72inch * 3.54inch

Qty per Carton

40

Carton Weight

10.00kgs / 22.05lb

Carton Size

47cm * 50cm * 30cm / 18.5inch * 19.69inch * 11.81inch

Loading Container

20GP: 378 cartons * 40 pcs = 15120 pcs
40HQ: 878 cartons * 40 pcs = 35120 pcs

In stock

Receives in 7 days.

Cylindrical Display Stand Security System Burglar Alarm / Anti - theft Alarm Display Holder with Infrared Remote Control for Smartphones with Micro - USB Port - Trustpick

Trustpick

Cylindrical Display Stand Security System Burglar Alarm / Anti-theft Alarm Display Holder with Infrared Remote Control for Smartphones with Micro-USB Port, ABS Cylindrical Micro-USB

64.00 ILS 81.00 ILS

-21%

Features
1. Security system is used to secure consumer electronic gadgets in exhibition or store open display against theft. This innovative system is easy to operate and is able to blend easily in any exhibits layout.
2. Charging function: The stand alone security device built in lithium battery, if the power outages that is also with security function. One set of external 5V power adapter, and it can be supply products for charging.
3. Alarming function:
- Contactor alarm: When we pull up the contactor and back of parts VBH adhesive, then it will immediately issued warming sound.
- Cutting cable alarm: When the alarm cable was pulled apart or cut off, then it will immediately issued warming sound.
4. Remote control function: The infrared remote control, anti-interference ability, sensitivity strong.
5. Material: ABS
6. Alarm volume: 95-120dB
7. Input voltage: 110-240V
8. Charging voltage: DC 5V 1A
9. Unlock: Infrared remote control
10. Size: 7.5x5x5cm

Operation Steps
1. The power cable & security stand will connected, and cable line can be go throgh the side groove or bottom.
2. Tear off the bottom sticker, then install it tightly on the clean table(Press time within 10 seconds).
3. Insert the touch sensor cable into the back interface.
4. Tear off the sticker with touch sensor.
5. Paste on the phone back with touch sensor,then it will connected the power adator with security stand.
6. Connect the charging cable with mobile phone, it is successful to install the security stand when you hear a alarm sound.

Specification:

General

Material

ABS

Size	Height82mm x Diameter48mm

Weight

N.W: 109 g

Package Weight

One Package Weight

0.24kgs / 0.53lb

One Package Size

14cm * 12cm * 9cm / 5.51inch * 4.72inch * 3.54inch

Qty per Carton

40

Carton Weight

10.00kgs / 22.05lb

Carton Size

47cm * 50cm * 30cm / 18.5inch * 19.69inch * 11.81inch

Loading Container

20GP: 378 cartons * 40 pcs = 15120 pcs
40HQ: 878 cartons * 40 pcs = 35120 pcs

In stock

Receives in 7 days.

Cylindrical Display Stand Security System Burglar Alarm / Anti - theft Alarm Display Holder with Infrared Remote Control for iPhone / iPod with 8 - Pin Port - Trustpick

Trustpick

Cylindrical Display Stand Security System Burglar Alarm / Anti-theft Alarm Display Holder with Infrared Remote Control for iPhone / iPod with 8-Pin Port, ABS Cylindrical 8 Pin

68.00 ILS 86.00 ILS

-21%

Operation Steps
1. The power cable & security stand will connected, and cable line can be go throgh the side groove or bottom.
2. Tear off the bottom sticker, then install it tightly on the clean table(Press time within 10 seconds).
3. Insert the touch sensor cable into the back interface.
4. Tear off the sticker with touch sensor.
5. Paste on the phone back with touch sensor,then it will connected the power adator with security stand.
6. Connect the charging cable with mobile phone, it is successful to install the security stand when you hear a alarm sound.

Features
1. Security system is used to secure consumer electronic gadgets in exhibition or store open display against theft. This innovative system is easy to operate and is able to blend easily in any exhibits layout.
2. Charging function: The stand alone security device built in lithium battery, if the power outages that is also with security function. One set of external 5V power adapter, and it can be supply products for charging.
3. Alarming function:
- Contactor alarm: When we pull up the contactor and back of parts VBH adhesive, then it will immediately issued warming sound.
- Cutting cable alarm: When the alarm cable was pulled apart or cut off, then it will immediately issued warming sound.
4. Remote control function: The infrared remote control, anti-interference ability, sensitivity strong.
5. Material: ABS
6. Alarm volume: 95-120dB
7. Input voltage: 110-240V
8. Charging voltage: DC 5V 1A
9. Unlock: Infrared remote control
10. Size: 7.5x5x5cm

Specification:

General

Compatible with

Apple: iPhone 12, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus

Package Weight

One Package Weight

0.26kgs / 0.56lb

One Package Size

14cm * 12cm * 9cm / 5.51inch * 4.72inch * 3.54inch

Qty per Carton

40

Carton Weight

10.00kgs / 22.05lb

Carton Size

47cm * 50cm * 30cm / 18.5inch * 19.69inch * 11.81inch

Loading Container