1. Resolution: 1920x1080
2. Screen type: VA
3. Connector type: USB
4. Connector: USB
5. Power supply: 12~24V
6. Automotive application function: GPS signal blocker
7. To better protect the privacy of your whereabouts
8. LED display facilitates reading at night
9. Note: only block the GPS signal of the card-less GPS

This is a cell phone signal Jammer engineered to protect your business / family privacy and safety. It is a high-tech product; It can block any GSM/CDMA/DCS/PHS/GPS cell phone signal at a distance of 1~5m (radius) within which cell phone cannot be called in or called out. And it will not interfere with other devices within the range.

Features:
1. Creates enough interference to block all cell phone signals around you (GSM / CDMA 849MHz~960MHz / DCS/PHS 1805MHz~1990MHz / GPS 1570-1580 MHz )
2. Fully metal construction - creates a solid and techie feel
3. Creates a 1~ 5m radius of cell phone signal block out area
4. Built-in 1000mAh Li-battery
5. Low power consumption and will do no harm to human body and environment-friendly
6. Lightweight, Easy to carry

Specification:
1. Output port: CDMA/GSM; Output frequency: 849~960MHZ
2. Output port: DCS/PHS; Output frequency: 1805~1990MHZ
3. Output port: GPS; Output frequency:1570~1580MHZ
4. Size: 95x45x18mm, Weight: 380g

1. Supports remote real-time view images on your mobile phone, Two-way voice intercom
2. Have double filter, automatic switch night vision at night
3. Screen capture a moving object will, following the object rotation
If there is a mobile object will alarm push
4. Can detect the movement of human body, someone will be carried out in alarm push
5. Support for viewing on the computer
6. Support multiple mobile phones to watch at the same time
7. Can share the camera with family, friends, watching
8. Processor: XM530A
9. Maximum image size: 1920 * 1080; 704 * 576
10. TF card supports up to 8G-128G
11. Lens interface: F2.0
12. Infrared illumination distance: Within 10 meters
13. Frequency Range: 2.4 GHz ~ 2.4835 GHz
14. WIFI standard: IEEE802.11b, 802.11g, 802.11n

1. Material: ABS imported reed switch; 1007#/26#360mmUL wire
2. Action distance: 18mm
3. Switch withstand voltage: 100VDC
4. Load current: 300mA
5. Switch output: normally open (the normally open door magnetic switch means that the switch signal is disconnected when the switch and the magnet are close together, and the switch signal is closed when the switch and the magnet are separated, commonly known as the passage)
6. Surface-mounted, suitable for installation on non-iron doors or windows
7. If the door magnetic is to be powered, the voltage is controlled at DC0V-24V, the power supply current cannot exceed 1A, and the load current is 120mA
8. Size: 27x14x8mm
9. Warm reminder: the door magnetic is not equipped with screws when it leaves the factory

1. Material: ABS+PC
2. Power supply parameters: Type-C/DC 5V 0.1A
3. Gear adjustment: three gears (first gear: red light is constantly on; second gear: red light is flashing; third gear: SOS mode is flashing)
4. 3D three-dimensional sensor chip, infrared equipment capture rate increases, to strengthen the effective checking of non-visible light
5. No need for complex operation, turn on the switch to find
6. Detection distance up to 5 meters, easy to check corners and high places
7. Two light modes to filter the danger, long bright mode for continuous observation and strobe mode for high light reflection
8. Extra long standby time, support Type-C fast charging
9. Lightweight and compact, comes with a lanyard, with the protection of your privacy and security
10. Battery capacity: 60mAh

1. 1080P high-definition wireless network camera, support dual lens with different focal lengths to switch freely
2. Support motion detection, when a moving target appears in the monitoring area, it will automatically push an alarm to the mobile phone
3. 2 million pixels, high-performance sensor, clear image
4. Support two-way voice, built-in high-power speaker and high-sensitivity microphone
5. Support both WiFi connection and network cable connection
6. Support two methods: memory card storage and cloud storage
7. APP operating system: iOS/Android
8. Audio compression coding: G.711/G.726
9. Viewing angle: 80 degrees/30 degrees
10. Video encoding: H.264
11. External expansion card: up to 128GB
12. Waterproof rating: IP65
13. Wireless network: WIFI (IEE802.11b/g/n)
14. Power supply: DC 12V/2A
15. Power consumption: 24W

packing list
Camera x 1
Manual x 1
Bracket x 1
Screw pack x 1
Power cord x 1

1. 5MP resolution, high definition quality
2. Support PTZ monitoring, PTZ 330 degrees + tilt 90 degrees
3. Equipped with 2.8-12mm zoom lens, support 4x optical zoom
4. H.265 compression, saving a lot of transmission and storage costs
5. Support smart night vision, three night vision modes. Infrared distance up to 60m
6. Two-way audio with noise cancellation
7. Support WiFi connection and AP connection
8. Support motion detection and sound detection
9. Maximum support for 64GB Mirco SD card
10. Support IP66 waterproof
11. Support multiple platforms, support APP, web browser and PC client
12. Support APP push notifications
13. Support Onvif and Rtsp protocols

Product parameters:
1. Sensor: 1/2.8 inch 5 megapixel progressive scan CMOS
2. Electronic shutter: automatic / manual movement, 1/25-1/10000s
3. Focal length: 2.8-12mm
4. Day and night switch: 2 infrared LEDs and 4 white LEDs
5. Infrared distance: 20m
6. White balance: automatic white balance
7. Digital noise reduction: support 3D noise reduction
8. Motion detection: support motion detection
9. Privacy Shelter: Support 4 areas
10. OSD support: OSD settings
11. Automatic restart: support scheduled restart
12. Video compression: H.265 / H.264
13. Resolution mainstream: 5MP (2560x1920)
14. Substream: (800x600), (640x480)
15. Video frame rate: 25fps (50Hz), 25fps (60Hz)
16. Bit rate: 32Kbps-6Mbps CBR/VBR adjustable
17. Video adjustment: brightness, saturation, chroma adjustment
18. Input: Built-in microphone
19. Output: Built-in speaker
20. Compression: G.711
21. Ethernet: RJ-45 (10 / 100Base-T)
22. Wireless: WiFi 802.11b / g / n, only supports 2.4G and AP mode
23. IP Type: Dynamic IP & Static IP
24. Network Protocol: HTTP, TCP / IP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP
25. Access Agreement Support: ONVIF
26. Maximum number of users: 6
27. Client: iPhone, iPad, Android, Windows PC
28. Power: DC 12V 2A
29. Power consumption: 2.5W (infrared LED off) / 7.2W (infrared LED on)
30. Working environment: -3-60 degrees Celsius, 10-90%.
31. Product size: 180x160x105mm
32. Product weight: 0.96kg

Packing list:
Camera x 1
Power adapter x 1
Waterproof cap x 1
Instruction manual x 1
Antenna x 1
Screw bag x 1

1. Home smart combustible gas alarm detector gas leak sensor, compatible with Amazon Alexa Assistant, you can connect the detector to a wifi router, and you can use the mobile application Tuya APP to control the detector.
2. Clear LCD display, track any information at a glance. Intelligently detect various gas leaks (such as petroleum gas, natural gas, methane) to reduce accidents.
3. APP alarm reminder, real-time display of gas concentration and body temperature.
4. Gas alarm: When the gas concentration reaches 6%LEL, the alarm starts to alarm. And issue a sound of danger! Serious gas leakage, (do not light a fire, do not turn on or off the lights, please evacuate immediately and call the police)
5. Heat alarm: When the body temperature reaches 57 degrees Celsius, the alarm starts to alarm.
6. Multi-state display: Displays a yellow light when the device fails or the service life is low. When the gas concentration or temperature reaches a certain height, it displays a red light, and other states display a green light.
7. The solenoid valve is linked with the manipulator, and the gas alarm automatically cuts off the power supply

Specifications:
1. Power supply: Micro USB+5V/1A
2. Power consumption: less than 200mA
3. Detection gas: natural gas (CH4), liquefied petroleum gas
4. Working environment: temperature -10-55 degrees Celsius
5. Range: 0-100%LEL
6. Alarm setting value: 6%LEL
7. Tolerance: +/-3%LEL
8. Response time: 30 seconds
9. Thermal alarm value: 57 degrees Celsius
10. Alarm volume: 70dB
11. Valve/manipulator drive output: 12V/300mA output for 15 seconds
12. Wi-Fi: 2.4GHz IEEE802.11b/g/n
13. Dimensions: 86 x 86 x 24.5mm

1. Calculate the liquid level height based on the time from ultrasonic emission to reception.
2. Water level monitoring and automatic low water level alarm, time display and alarm
3. Real-time understanding of water tank/indoor temperature
4. Transmission frequency band: 433MHz
5. Transmission distance: 100 meters (open space), 30 meters (effective distance)
6. Transmitter parameters:
Waterproof grade: IP65
Power supply: 6xAAA (1.2V) (not included)
Weight: 216g
Size: 6.8x10.9x16.7cm
Temperature resolution: 0.1 degrees Celsius, accuracy: +/-1 degrees Celsius
Water level resolution: 0.01m, accuracy: +/-0.05m
Water level measurement range: 1-5m
7. Receiver parameters:
Indoor temperature range: 0-50 degrees Celsius, 32-122 degrees Fahrenheit
Resolution: 0.1 degrees Celsius
Accuracy: +/-1 degree Celsius
Water tank temperature measurement range: -40~60 degrees Celsius, -40~140 degrees Fahrenheit
Alarm duration: 120s
Power supply: 3xAAA batteries (not included)
Weight: 184g
Dimensions: 13.5x2.6x8.4cm

1. Product software: Tuya Smart
2. Main CPU: FH8632V2
3. Imaging device: 1100; viewing angle: 70 degrees
4. Network frequency range: 2.4GHz
5. P2P WIFI connection: Support
6. Resolution: 1920 x 1080
7. Video encoding: H265
8. Wireless network: WIFI(IEE802.11b/g/n)
9. APP operating system: iOS/Android
10. Two-way voice intercom: Support
11. Two-way video intercom: Not supported
12. Left and right mirror image: Not supported
13. Up and down mirroring: Support
14. 2D/account sharing: Account invitation
15. Smart tracking: Support mobile tracking
16. Cloud storage: Support
17. One key reset: Support
18. Alarm video: Support; sound and light alarm: Not support
19. Computer terminal: Not supported
20. Audio recording: Support
21. External expansion card: Support up to 128GB (not included)
22. Wired network: Not supported, no network port
23. Video playback: Support
24. Real-time monitoring: Support
25. Mobile phone photo/video: Support
26. Prompt tone: Chinese/English
27. APP language: Follow the phone
28. Connection method: Scan code, WiFi quick connection
29. Multiple mobile phones to watch: Support 6 at the same time
30. Recording period: Timed/continuous recording
31. Network protocol: HTTP, HTTPS, IPV4, IPV6, TCP, UDP, RTSP, ICMP, RTP, APP, DHCP, DNS, QOS
32. Aperture: fixed, 3.6mm
33. Mobile/sound alarm: Support mobile alarm screenshot push
34. 433 linkage alarm: Not supported
35. Indoor/Outdoor: Indoor
36. Waterproof level: No
37. Power specification: DC5V/2A
38. Infrared/white light illumination: Automatic/manual
39. Infrared lamps: 4pcs
40. Shaking head range: Support, about 355 degrees, 90 degrees up and down
41. Video/hour: 2.5 hours
42. Product size: 115 x 72 x 82mm
43. Product net weight: 170g
44. Product accessories: Manual, bracket, power supply, screw package

1. Calculate the liquid level height based on the time from ultrasonic emission to reception.
2. Water level monitoring and automatic low water level alarm, time display and alarm
3. Real-time understanding of water tank/indoor temperature
4. Transmission frequency band: 433MHz
5. Transmission distance: 100 meters (open space), 30 meters (effective distance)
6. Transmitter parameters:
Waterproof grade: IP65
Power supply: 6xAAA (1.2V) 900mAh battery (included)
Weight: 216g
Dimensions: 6.8x10.9x16.7cm
Temperature resolution: 0.1 degrees Celsius, accuracy: +/-1 degrees Celsius
Water level resolution: 0.01m, accuracy: +/-0.05m
Water level measurement range: 1-5m
7. Receiver parameters:
Indoor temperature range: 0-50 degrees Celsius, 32-122 degrees Fahrenheit
Resolution: 0.1 degrees Celsius
Accuracy: +/-1 degree Celsius
Water tank temperature measurement range: -40~60 degrees Celsius, -40~140 degrees Fahrenheit
Alarm duration: 120s
Power supply: 3xAAA batteries (not included)
Weight: 184g
Dimensions: 13.5x2.6x8.4cm

1. Model: YT24-300W
2. APP: V380 Pro
3. System structure: Embedded Linux system, ARM chip structure
4. Chip: AK330
5. Resolution: 300W
6. Sensor Resolution: SG
7. Lens: 3.6mm
8. View angle: 75 degree
9. Pan-tilt: Rotates Horizontal: 355 degree; Vertical: 70 degree
10. Preset point quantity: 6 pcs
11. Video compression standard: H.265/20FPS
12. Video format: PAL
13. Minimum illumination: 0.01Lux at F2.0, VGC ON, 0Lux with IR
14. Electronic shutter: Auto
15. Backlight compensation: Support
16. Noise reduction: 2D, 3D
17. Led quantity: 6pcs Infrared LED
18. Network connection: WIFI wireless transmission (support IEEE802.11b/g/n wireless protocol).Support AP Hotspot, adapt to RJ45 Network port.
19. Night vision: IR-CUT switch Automatic: About 5-8meters (It varies from environment)
20. Audio: Built-in microphone and speaker, support two-way audio and real-time transmission. ADPCM audio compression standard, self-adapt to code stream
21. Network protocol: TCP/IP, UDP, RTSP, HTTP, DDNS, DHCP, FTP, NTP
22. Alarm: Motion detection and picture push; AI Human intrusion Detection (optional)
23. Storage: TF Card up to 128GB (not included); Cloud storage /Cloud disk (optional)
24. Power input: 5V/1.6A
25. Work environment:
- Working temperature: -10 degree C ~ + 50 degree C;
- Working Humidity: Less than or equal 95%RH

1. Material: ABS
2. Number of channels: mono
3. Output sound pressure: 90dB
4. Rated voltage: DC12V
5. Operating voltage: 3-24V
6. Operating frequency: 3300+/-500Hz
7. Operating temperature: -20-+80 degrees Celsius
8. Driving mode: piezoelectric (crystal)
9. Piezo buzzer, high decibel, power on the sound, durable
10. Buzzer will sound continuously, you can easily control the buzzer, is an integrated structure of the electronic sound generator
11. DC power supply, widely used in computers, printers, copiers, alarms, electronic toys, automotive electronics, telephones, timers and other electronic products
12. Size: about 23 x 12mm

1. Model: YT24-100W
2. APP: V380 Pro
3. System structure: Embedded Linux system, ARM chip structure
4. Chip: AK3918EV200
5. Resolution: 100W
6. Sensor Resolution: 1/4 inch sensor
7. Lens: 3.6mm
8. View angle: 75 degree
9. Pan-tilt: Rotates Horizontal: 355 degree; Vertical: 70 degree
10. Preset point quantity: 6 pcs
11. Video compression standard: H.265/20FPS
12. Video format: PAL
13. Minimum illumination: 0.01Lux at F2.0, VGC ON, 0Lux with IR
14. Electronic shutter: Auto
15. Backlight compensation: Support
16. Noise reduction: 2D, 3D
17. Led quantity: 6pcs Infrared LED
18. Network connection: WIFI wireless transmission (support IEEE802.11b/g/n wireless protocol).Support AP Hotspot, adapt to RJ45 Network port.
19. Night vision: IR-CUT switch Automatic: About 5-8 meters (It varies from environment)
20. Audio: Built-in microphone and speaker, support two-way audio and real-time transmission. ADPCM audio compression standard, self-adapt to code stream
21. Network protocol: TCP/IP, UDP, RTSP, HTTP, DDNS, DHCP, FTP, NTP
22. Alarm: Motion detection and picture push; AI Human intrusion Detection (optional)
23. Storage: TF Card up to 128GB (not included); Cloud storage /Cloud disk (optional)
24. Power input: 5V/1.6A
25. Work environment:
- Working temperature: -10 degree C ~ + 50 degree C;
- Working Humidity: Less than or equal 95%RH

1. An important part of any fire safety system
2. With this protective cover, the fire sprinkler can avoid potential damage caused by accidental collision or tampering
3. The easy-to-install and removable fire sprinkler cover provides a 4. simple and effective solution for protecting your fire sprinkler system
5. Lightweight design, suitable carrying size, easy to use and easy to operate
6. Made of alloy material, high durability and not easy to deform
7. The protective cover is very conspicuous and easy to identify in an emergency
8. Very durable and can be used for a long time

1. Pixel: 1080P 200W
2. Wireless network: 2.4G Single Frequency
3. Operating temperature: -10 degrees to 55 degrees
4. Add device scan code, WiFi fast connection.
5. Support voice monitoring, intercom, motion detection, sound detection and alarm.
6. Cloud storage video supports alarm classification query function.
7. Support all kinds of mobile phone remote monitoring, suitable for iOS, Android system.
8. Support 8-128G TF card storage (this product does not contain TF card)

packing list:
Camera x1
Reset pin x1
Manual x1

1. Voltage: DC3.6V
2. Standby time: 3-6 months
3. Alarm volume: 110dB-120dB
4. Power supply: 3 x AG13 button batteries
5. Door magnet alarm, easy to install, long standby time, loud alarm, stable and reliable, compact and hidden
6. Designed for door and window anti-theft design, installation using double-sided tape, firm and very convenient
7. Weight: alarm about 35 g, magnetism about 8 g
8. Size: the alarm is about 4 x 5 x 1.5 cm, the magnet is about 1.5 x 5 x 1.5 cm

Door magnetic alarm working principle:
-When the door/window is open and the distance between the alarm and the magnetic strip is more than 15mm, the alarm will sound; the alarm will last for 30 minutes, after that, the alarm will be interrupted

Installation instructions:
1. Please clean the surface where you install the alarm and magnetic stripe first, make sure the surface is completely clean and dry before proceeding
2. Please use the supplied double-sided tape to install the alarm and magnetic strip, and make sure it will not fall off
3. When the door/window is closed, make sure the alarm and magnetic stripe are not more than 5mm apart or in contact

1. Support motion detection.
2. Support up to 64GB micro SD card.
3. Support email alarm and APP push.
4. Support 4 online visitors simultaneously.
5. Support infrared night vision.

Features
1. HD night vision, motion detection, alarm area selection
2. Support crying detection, music lullaby playback, temperature and humidity monitoring
3. Support ambient light adjustment, feeding plan setting
4. Support mobile phone iOS, Android system remote monitoring
5. Support two-way voice, support SD card (maximum 128G), support cloud storage

Parameter
1. 4 million wireless IP cameras
2. Support H.264/H.265 video compression technology, high image quality, low bit rate
3. 3.6mm HD fixed focus camera, TR dual filter switch
4. 8-10m effective infrared distance
5. Interface:
- Reset button: support
- Power interface: Micro-USB
6. Power adapter:
- Output: DC 5V
- Interface: Micro-USB
- Certification: CE, ROHS

Packing list:
- Power adapter x1
- Camera x1
- Manual x1
- Mounting Kit x1

1. Simple installation, easy to use, with bracket, no need to pull wires, the direction of the solar panel can be adjusted
2. 300W high-definition pixels (2288X1288), clear picture quality
3. Standard H.265 video compression algorithm to meet the transmission of high-definition video in a narrow bandwidth network
4. Support motion detection, alarm push
5. Support two-way voice intercom, echo cancellation, noise suppression
6. Infrared night vision: 2 infrared lights, night vision distance up to 20 meters
7. Support 2.4G Wi-Fi (IEEE802.11b/g/n)
8. Support free 30-day cloud storage technology, support TF card storage (up to 128GB)
9. IP66 waterproof rating
10. Support IR-CUT, 2 dot matrix infrared lights, infrared distance 20 meters
11. Support 2D/3D noise reduction
12. Support PIR infrared human body induction alarm
13. Support digital wide dynamic, alarm recording
14. Image sensor: 3 million pixel 1/2.7 inch CMOS sensor
15. Lower illuminance: color: 0.1Lux F1.2, black and white: 0.01Lux F1.2
16. Lens: 3.6mm
17. Viewing angle: 75.7 degrees
18. Compression: H.265X
19. Resolution: Main stream: 3MP (2288*1288), Secondary stream: (800*448)
20. Video frame rate: 25fps(50HZ), 25fps(60HZ);
21. Audio compression: G.726/G.711
22. Networking method: WiFi 802.11b/g/n, 2.4G frequency band
23. IP Type: Dynamic IP
24. Power supply mode: solar + 18650 battery (5200mAh) (battery is not included)
25. Solar cell power: 2.5W
26. Power supply: 5V
27. Power: 3W
28. Working environment: -20 to 50 degrees Celsius, 10-80%
29. Product size: 223x125x70mm
30. Product weight: 523g
31. Accessories: camera*1, screw bag*1, manual*1

Product function introduction:
1. Backlight on/off function
2. Time function 12H/24H system (default display at startup: 0:00 24 hours)
3. Transmitter low battery reminder
4. Alarm clock function (power-on default: off)
5. Buzzer on/off
6. Indoor temperature Celsius/Fahrenheit (default Celsius)
7. Data signal indication
8. Water tank temperature Celsius/Fahrenheit (default Celsius)
9. Water pump control box power output indication
10. Water tank water level displays meters/feet (power-on default: meters)
11. Low water icon
12. Water level depth simulated on 10-element LCD bar graph
13. Working voltage of water pump control box: AC 110-230V
14. Receiver: 3xAAA 1.5V 900mAh (not included), receiver battery life is 12 months, no backlight activation at reference time
15. Transmitter: 6xAAA 1.2V NiMH 900mAh (included), transmitter battery life is 12 months (reference time is not exposed to sunlight)
16. Note: The water pump control box, transmitter and receiver communicate wirelessly at 433MHz, and the transmission distance can reach 100 meters in open areas.
17. Note: The solar panel provides auxiliary power and has a rechargeable battery charging function. Please use nickel-metal hydride rechargeable batteries (which can reduce the frequency of battery replacement and save battery usage costs to a certain extent). When installing, please install the solar panel. Towards the sun to power and charge rechargeable batteries when exposed to sunlight

Describe:
1. Transmitter weight: 137g
2. Receiver weight: 161g
3. Water pump control box weight: 134g
4. Transmitter size: 6.8x10.9x16.7cm
5. Receiver size: 13.5x2.6x8.4cm
6. Water pump control box size: 7x3.5x13cm

Packing list:
- TYPE-C power cord x 1
- Instruction manual x 1
- Screws x 3

1. Support H.265 video compression format
2. 8CH wireless NVR+8ch 3MP HD dome camera
3. Three types of intelligent full-color night vision with dual light sources
3. Support two-way voice
4. 7 days free recurring cloud storage
5. Maximum support for 1-bay 6TB hard drive
6. Support motion detection alarm push video recording
7. Support mobile phone APP remote monitoring
8. APP: EseeCloud

1. Material: ABS
2. Size: 58x38.1x14.6mm
3. Infrared optical inspection, accurate inspection of hidden candid photos
4. Special sensor chip to improve sensitivity and capture efficiency
5. The detection distance can reach 5-6 meters, making it easy to detect corners and high places.
6. Supports Type-C fast charging, which can last up to 720 hours of standby after one full charge.
7. Compact and convenient, safe to carry with you
8. Anti-interference, check and kill at a glance

1. Support H.265 video compression format
2. 8CH wireless NVR+4ch 3MP HD dome camera
3. Three types of intelligent full-color night vision with dual light sources
3. Support two-way voice
4. 7 days free recurring cloud storage
5. Maximum support for 1-bay 6TB hard drive
6. Support motion detection alarm push video recording
7. Support mobile phone APP remote monitoring
8. APP:EseeCloud

1. Detection frequency band: 100MHz
2. Working range: 10 meters
3. Working voltage: 5V
4. Battery: 500mAh
5. Power supply: Type-c interface
6. Pure optical principle detection can detect various camera devices disguised in TVs, air conditioners, table lamps, corners, etc.
7. GPS locator detection, quick search
8. Five levels of signal adjustment, the more white light, the stronger the signal.
9. Sound alarm, accurately lock various cameras
10. Compact design, you can always take your safety necessities with you when you go out
11. High-sensitivity detection scanning, when a signal is detected, there will be a "beep" sound
12. LED scanning range is wide, not missing any hidden cameras, locators, or bugs in any corner
13. Weight: 34 grams
14. Overall dimensions: 2.7x9.5cm

1. The product quickly sleeps and wakes up quickly to achieve intelligent power saving
2. 2 million pixel high-definition image, intelligent dual-light full-color night vision
3. Built-in 14400 mAh rechargeable lithium battery, continuous charging of removable solar panel, ultra-low power consumption, ultra-long standby
4. Built-in microphone and speaker, support two-way voice intercom
5. Built-in PIR alarm sensor, providing accurate and instant alarm, mobile phone APP push
6. Support PTZ control, 330 degrees left and right, 90 degrees up and down
7. Support cloud storage and 128G TF card local storage
8. APP supports Android/iOS
9. IP66 outdoor protection
10. Support 4G(TD-LTE,TD-LTE / LTE FDD, TD-LTE / LTE-FDD)