1. Installed on a suspended ceiling, suitable for most environments, such as hospitals, supermarkets, subway stations, etc.
2. Can also be mounted on a wall.
3. The length of the telescopic pole can be adjusted manually to meet your needs for TV height in different environments.
4. Rotating around 360 degrees allows you to use one TV as multiple units, with a 30-degree tilt angle adjustment to meet your different vision needs.
5. The screw lock design increases the stability between the board and the hook.
6. The wiring design in the tube, the wire is not exposed, and the farewell problem of the wire is farewell.

1. You now have all the options you need for recording your favorite movies, TV shows, or life video from an analog video source onto your computer
2. And edit them, burn DVD disc, convert them, and send them to your iPod, PSP or 3GP mobile phone, so you can watch them any where and any time
3. If you use a scart interface, please connect equipment following below picture and set the switch to be Output
4. You maybe have to buy Video and Audio cable, and S-Video cable to connect the USB video capture with your analog video device, you need to buy the Scart Video / Audio adapter if the output of your video source device is scart type
5. The following devices can be used as analog video sources: video recorder, DVD player, Video camera, Set-top box, Game player and any device that provides an analog video signal

Features
1. 3.5 inch high definition TFT transmissive LCD screen, 480(RGB) x 272 pixel, 70.02x52.58mm active area.
2. Fully DVB S/DVB S2, MPEG2/MPEG4 compliant, MPEG2 / H.264 hardware decoding.
3. Digital meter for signal strength and quality.
4. Support scan of auto, blind, manual or NIT.
5. Sound and light alarm for locking signal.
6. Auto calculate angle of AZ, EL.
7. Support DISEQC 1.0/1.1/1.2, 0/22KHz tone.
8. Speaker integrated.
9. Support both AV out and AV in.
10. LNB supply: 13V/18V, Max 400mA, LNB short protect.
11. 7.4V/3000mAh li-ion battery included.
12. Software upgrade via USB port.
13. Easy to carry.
14. Demodulation Type: QPSK, 8PSK.
15. Symbol rate: 2 less than Rs less than 45M band (SCPC/MCPC).
16. Input frequency 950~2150MHz, signal input level -65~ -25dBm, band switch control: 22KHz.
17. AV output / input interface: 3.5mm jack, CVBS video output / input, stereo audio L/R output / input.

Video Decompression
1. Resolving rate: PAL 25 frame at 720 x 576, NTSC 30 frame at 720 x 480.
2. Signal compatibility: Support conversion for different video formats.
3. Video format: 4:3, 16:9, by pan & scan and letter box conversion.
4. Audio decompression: MPEG1 Layer I/II, MPEG2 Layer I/II.
5. Audio output mode: Stereo, Mono, R/L.

1. Support 1080P HD mode
2. 50 miles range
3. Coaxial cable length: 3m
4. v.s.w.r. :<= 1.5, maximum:1
5. Impedance: 75 ohms
6. Multi-directional capability
7. Can receive all "free" channels
8. Gain: 25 dBi (with amplifier)
9. Operating frequency: 174 ~ 240MHz, 470 ~ 862MHz
10. Product size (mm): 220x140x0.8mm
11. Double-sided tape
12. Radome color black
13. Operating temperature: -45 ~ 85 Degrees Celsius
14. Storage temperature: -45 ~ 85 Degrees Celsius

1. Frequency: A2010-2025MHZ, E2320-2370MHZ, D2500-2690MHZ, F1880-1900MHZ
2. Voltage standing wave ratio=1.5
3. Gain 5dBi
4. Polarization type vertical
5. Rated power 50W
6. Input impedance 50Ohm nominal
7. Vertical base scale

1. Support 1080p HD mode
2. 25 miles range
3. Coaxial cable: 3.7m length
4. Connector type: F male to TV
5. v.s.w.r. : < = 1.5, maximum: 1
6. Impedance: 75 ohms
7. Multi-directional capability
8. Can receive all "free" channels
9. Gain: 28 DBI (with amplifier)
10. The color of the conventional antenna board is divided into white, black, transparent, support samples and drawings.
11. Working frequency: 174 ~ 240mhz, 470 ~ 862mhz
12. Product Dimensions (mm): 295 x 75 x 0.5mm
13. Double-sided tape
14. Radome color black
15. Operating temperature: -45 ~ 85 Degrees Celsius
16. Storage temperature: -45 ~ 85 Degrees Celsius

1. The product complies with USB video UVC specification and USB audio UAC specification
2. Support operating systems such as Windows, Android, Linux and MacOS
3. Support most acquisition software, such as VLC, OBS, Amcap, etc.
4. Support HD local loop out
5. Support microphone input, audio jack supports integrated headset (Note: when the microphone and headset integrated headset are used at the same time, the integrated headset has no microphone function.)
6. Support free switching of two HD signal sources
7. Support microphone audio and HD audio overlay collection
8. Input terminal: HD/F input can support 4K, 8/10/12 bit color depth input format
9. Output: USB-C/M supports 1080P; MJPEG output mode
10. HD capture, strong compatibility, smooth picture
11. No need for external power supply, portable
12. Operating environment: -20 degrees Celsius -65 degrees Celsius, relative humidity is 5%-95%
13. Product size: 230 x 46.9 x 20.2mm
14. Product color: gray

About The Product
1. MEASY FHD686 wireless HD Multimedia Interface extender transmits full HD audio and video from any device source to the TV wirelessly.
2. No any cable connection is required between the source device and the TV. You can watch the Full HD TV freely from anywhere.
3. It is easy to install, plug and play, no need to install any software, no need to do any setting. It can be installed within 2 minutes!
4. It uses the latest distributed wireless technology, and the signal can be clear and smooth through a single non-high-density wall or ceiling, with zero interference of image and sound.
5. The wireless HD Multimedia Interface extender ensures smooth signal flow from any AV device with an HD Multimedia Interface output to a TV. It provides an immersive media streaming experience because of stable and uncompressed Full HD transmission .

Features
1. The resolution is up to 1080p at 60Hz
2. HD Multimedia Interface 1.4, HDCP1.4
3. The transmission distance is up to 200m (In the open space without interference)
4. Channel can be selected. A screen display the Channel
5. The latency time is 150ms
6. Frequency: 5.8GHz and 2.4GHz dual band

Package List
1. Transmitter x 1
2. Receiver x 2
3. Power Adapter x 2
4. External IR Cable x 1
5. Manual x 1

Specification
1. HD Multimedia Interface standards: HD Multimedia Interface v1.4, HDCP1.4
2. HD Multimedia Interface resolution: Up to 1080P at 60HZ
3. Audio format: 1080P high-end
4. Data max transmission rate: 6.75Gbps
5. Wireless transmission satndards: IEEE802.11a/b/g/n
6. Operating frequency: 2.4GHz 150Mbps, 5GHz 300Mbps
7. Wireless transmission power: 16+- 2dBm
8. Transmission distance: 200m (open space accessibility)
9. IR Frequency rate: 38Khz
10. DC power input: AC 100V-240V 50/60HZ
11. DC power output: DC 12V/2A
12. Operating temperature: -5 degree C + 70 degree C
13. Operating dimension: 5%-90%

Features
1. High-quality transmit with 48k-16bit sampling.
2. Uncompressed transmit.
3. About 100 meters transmit of outdoors.
4. It is easy to use,plug and play.
5. AU680 wireless audio transmitter is a transmitter that enables wireless audio for home entertainment.
6. The product consists of the transmitter and the receiver.

Specification
1. Operating Voltage: Transmitter: DC 3.6V-5.5V; Receiver: DC 3.6V-5.5V
2. Working current: Transmitter: 250mAh; Receiver: 100mAh
3. Ambient temperature: 0-85 degree C (Transmitter and Receiver)
4. The actual operating frequency range of the modual: 749-770MHz (Transmitter and receiver)
5. Modulation: Pi/4DQPSK (Transmitter)
6. Channel spacing: 4MHz (Transmitter and receiver)
7. Frequency selection method: Transmitter: Carrying channel one-way loop selection; Receiver: Provides automatic search and manual conversion of two models
8. Frequency stability: +/-100KHz (Transmitter and receiver)
9. The actual working channel of the modual: 20CH
10. Module channel spacing: 1MHz
11. Transceiver distance (using transmit power 100nv in open space): 100m
12. Transmit power (default is 100nV when ordering): 1-100mV (default 100mV)
13. Receiving sensitivity: -95dBm(Receiver)
14. Input level: 1.0VpK(Transmitter)
15. Input resistance: 10K ohm (Transmitter)
16. Input interface (Transmitter):
- Three input modes
-Stereo audio input
-Normal microphone input
-Monitor pickup audio input
17. Stereo input level 1: 30mW RL=32ohms (Receiver)
18. Stereo input level 2: 50mW RL=32ohms (Receiver)
19. Output impedance: 1k ohms (Receiver)
20. Input-output gain ratio: 1:01
21. Sphere of influence: 20-20000Hz
22. Time latency: 2.5ms
23. Sampling Rate: 48KHz 32bit
24. Signal to noise ratio: 96dB
25. Distortion: 0.3% at 1KHz
26. Dynamic Range:90dB
27. Left and right channel isolation: 85dB

Package List
1. Transmitter x 1
2. Receiver x 1
3. USB power cable x 2
4. Manual x 1

1. 30m range wireless coverage
2. Zero delay transmission, super anti-interference
3. No compression, full HD 1080P 3D audio and video lossless transmission
4. 60GHz exclusive professional wireless extension technology
5. Pure hardware free drive design, free setup, plug and play
6. Fully compatible with various resolution HDMI input and output devices
7. Easy to stream videos from a display device to a receiver device
8. No software is required, convenient to use through plugging
9. Supports 3D, steady signal, reliable and safe to use
10. Compatible with devices with digital video signal
11. Compact and lightweight design, convenient to carry anywhere you like
12. Ideal for home theater, office, travel, etc.
13. Product size: 8.5x8.5x2cm
14. Packing list:
1 x Transmission kit
1 x Power adapter
1 x Manual

1. Band: 2.4GHz ISM, 8 channels are optional
2. Transmission distance: 400 meters
3. Support system: PAL/NTSC
4. Interface: RCA (AV)
5. Transmission method: Wireless
6. Support through wall transmission
7. Digital display channel, convenient and intuitive
8. Shell: aluminum, super cooling effect
9. Support infrared return function
10. Product size: 10x10x2.7cm

1. For Radio Mobile Cell Phone with 3.5mm Port
2. Plug Type: 3.5mm
3. Unstretched Size: 85x20mm
4. Full Length: 245mm
5. Max Diameter: 6mm
6. Weight: 7g

1. Frequency: 791-960MHz /1710-2100MHz/2500-2690MHz
2. VSWR: <=1.5
3. Gain: 35dBi (Max)
4. Polarization Type: Vertical
5. Rated Power: 10W
6. Input Impedance: 50 Ohms nominal
7. Cable Length: 2m
8. Connector Type: TS9 male
9. Install the Way: Adsorption

1. Frequency: 791-960MHz /1710-2100MHz/2500-2690MHz
2. VSWR: <=1.5
3. Gain: 35dBi (Max)
4. Polarization Type: Vertical
5. Rated Power: 10W
6. Input Impedance: 50 Ohms nominal
7. Cable Length: 2m
8. Connector Type: SMA male
9. Install the Way: Adsorption

1. Frequency: 791-960MHz /1710-2100MHz/2500-2690MHz
2. VSWR: <=1.5
3. Gain: 35dBi (Max)
4. Polarization Type: Vertical
5. Rated Power: 10W
6. Input Impedance: 50 Ohms nominal
7. Cable Length: 2m
8. Connector Type: CRC9 male
9. Install the Way: Adsorption

1. Telescopic antenna, full extended length: 45cm
2. Material: Iron
3. Antenna frequency range: 80-108MHz, 470-862MHz
4. Replacement of your damaged, lost antenna, or your want a new one.
5. Great for portable radio scanner, FM radio, PA system, VHF/UHF wireless system, portable DVD, digital TV.

1. Frequency Range: 2400Mhz 5G 5800Mhz
2. VSWR: <=1.5
3. Gain: 12 dBi (MAX)
4. Polarization Vertical
5. Max input Power: 50W
6. Connector Type: SMA Male
7. Length: 19.5 cm
8. It is widely used for wireless transmitter & wireless receiver, such as AP, WLAN, WIFI router, WIFI adapter.
9. Advantage: nickel Plated has the excellent quality in solderability, conductivity and stability in metal.

1. Frequency Range: 2400Mhz 5G 5800Mhz
2. VSWR: <=1.5
3. Gain: 12 dBi (MAX)
4. Polarization Vertical
5. Max input Power: 50W
6. Connector Type: RP-SMA Male
7. Length: 19.5 cm
8. It is widely used for wireless transmitter & wireless receiver, such as AP, WLAN, WIFI router, WIFI adapter.
9. Advantage: nickel Plated has the excellent quality in solderability, conductivity and stability in metal.

1. Acceptable TV standards include: analog TV signals, CMMB, DVB-T, DMB-T and other digital TV signals.
2. The product is suitable for roof installation
3. Power supply: USB 5V
4. Receiving frequency range: 470-860MHz
5. Gain: 22dB
6. Cable length: 5 meters
7. Connector form: IEC header / F header
8. Polarized form: vertical polarization
9. Installation method: adsorption type
10. Antenna size Beam: 60
11. Antenna length: 129mm

Features:
1. Improves FM & multiplex stereo reception.
2. Allows a longer reach and receive more channels and radio stations.
3. Easy to Install. Simply push the F type Female connector into the intended male connector.
4. Provides a better radio reception for stereo receivers in your home, office, garage, basement and so on.
5. Fit for Blaupunkt Pioneer Clarion Kenwood Alpine JVC Sony Yamaha Denon Teac Panasonic Onkyo Marantz Sansui Roberts Radio etc.

Specification:
1. Gain: 3dB
2. Frequency Range: 520-1710MHz
3. Output Impedance: 300ohm
4. Standing Wave Ratio: <=1.5dB
5. Working Voltage: 12V
6. Total Length: 2.0m / 6.56in

1. Connector A: UHF male plug PL259 (screw inside & center is male pin)
2. Connector B: SMA male plug (inside screw and center is male pin)
3. Cable type: UHF-SMA RG316 Pigtail Cable
4. Impedance: 50 ohm
5. Material: Copper
6. Cable length: 15cm

1. Power: 2W
2. Frequency Range: DC-6.0GHz
3. VSWR: <=1.20
4. Connector: SMA
5. Impedance: 50 ohm
6. Attenuation: 1-10dB +/- 0.5dB
7. Dimension: 30mmx8mm/ 1.18x0.31in
8. Material: copper + plated gold

1. Connector: SMA Female to TV IEC Male
2. Material: Copper, Nickel plated
3. Conductor: Copper, Gold plated
4. Impedance: 50ohm
5. Dimensions: 10x26mm/0.39x1.02inch

1. Rated voltage: AC60V
2. Withstand voltage: AC200V
3. Contact resistance: 20M ohm
4. Frequency: DC 0-18GHz
5. Temperature: -40 ~ +90 degrees Celsius
6. Cable Type: RG402 Cable
7. Connector Impedance: 50ohm
8. Contact Termination: Solder
9. Connector Body Style: Straight
10. Connector A: SMA Male
11. Material: Copper
12. Dimensions: 5.65x12.6mm/0.22x0.5inch