1. Rear-mounted wireless sports Bluetooth headset
2. Automatic conversion of phone and music, up/down selection, play/pause
3. Stereo high-quality music, shocking bass, clear call
4. Support one-to-two function, call rejection function
5. Support operation voice (Chinese / English) prompt function
6. Large battery capacity, low power consumption, long life
7. Support iOS system power display
8. Intelligent noise reduction high version CVC6.0
9. 5.1 channel with surround sound

1. Pillow fabric: colored cotton
2. Pillow core material: environmentally friendly latex/silk cotton
3. Scope of application: infants and young children 0~12 months old
4. Product function: correct flat, eccentric and pointed heads in infants and young children
5. Principle of shaping pillow: assists in correcting the shaping and protects the balanced development of the left and right sides of the babys head
6. Latex filled model, removable and washable
7. U-shaped gradually higher design, pressure relief protection door
8. The back of the pillowcase has a safe invisible zipper design, making it easy to remove and wash
9. Dimensions: 28x25.5cm

1. Material: ABS plastic cover, stainless steel
2. Dimensions: the total length is about 23 cm, the width of the ruler is 10 cm, and the width of the ruler is 1.45 cm
3. Weight: about 423 grams
4. Range: 0-150 mm
5. Scale process: magnetic stripe film
6. Resolution: 0.01mm/0.005inch
7. Power supply: with button battery
8. Application: outer diameter, inner diameter, aperture, step measurement

Features:
1. Forged stainless steel surface, not easy to rust, durable
2. Large LCD screen, accurate, clear and intuitive, can switch between metric and imperial systems
3. Accurate measurement, quick return to zero, convenient work
4. The nut knob can be adjusted for fixed measurement and flexible use (tighten counterclockwise, loosen clockwise)
5. Magnetic stripe film, anti-glare and wear-resistant
6. Conversion table attached to the back for easy conversion

1. Large Screen Digital Display Electronic Digital Calipers
2. Made Of 40cr13 Stainless Steel
3. Zinc Alloy Metal Shell And Stainless Steel Measuring Claw
4. LCD HD Large Screen
5. One-key Conversion Between Metric And Inch

1. Material: plastic case, stainless steel ruler body
2. Size: about 23.5x7.6 cm
3. Weight: about 240 grams
4. Range: 0-150mm
5. Function: measure inner and outer diameters, steps
6. Resolution: 0.01mm
7. Power supply: Built-in button battery
8. Features: electronic digital display, LED screen, convenient reading, stainless steel ruler body, not easy to rust, wear-resistant and durable, wide applicability

1. Material: stainless steel
2. Measuring Length: 150mm
3. It can be measured multi-angle, and rotated 180 degrees
4. One-ruler multi-purpose, engineering drawing process, angle measurement, student drawing, architectural design, woodworking decoration, length measurement.

1. Product type: woodworking compass
2. Measuring angle: 0-270°
3. Measuring range: 1000mm
4. Scope of application: woodworking, masonry
5.Accuracy:1

1. Range: 0-50 mm
2. Resolution: 0.1 mm
3. Material: ABS engineering plastic
4. Battery: CR2032 3V button battery
5. Weight: 60g
6. Features: lightweight and portable, intuitive reading, accurate measurement, LED digital display, one-key switch between millimeters and inches

Feature
1. Every blade with its thickness clearly on it, easy to select and return when you dont use.
2. Ideal for feeler gauge valve shim use and metric gap measuring between two items or parts.
3. It contains 17 blades, from 0.02mm to 1.00mm.
4. The blades are made of high quality carbon steel.

1. Material: viscose, PET
2. Composed of 7 layers of structures with different functions
3. Thin and transparent, about 0.12mm thickness, does not affect the use
4. Clear and transparent, high transmittance
5. Environmentally friendly materials, no cutting, accurate matching
6. Only the computer screen protector is shipped, no others

1. Material: TPU
2. Use environmentally friendly materials, wear-resistant, transparent, and elastic
3. TPU material, can be rinsed, easy to clean, can be used repeatedly, not repeatedly rubbed
4. Prevent water droplets, dust and stains from entering the keyboard and damaging the machine in all directions
5. Thin and transparent, about 0.13mm thickness, does not affect the use
6. Only keyboard film is shipped, no others

1. The length of pliers is 205 mm and 190 mm, respectively.
2. Storage bag size: 28*14 cm
3. Handle material: PP, ABS
4. Material: Nickel-Chromium Alloy Steel
5. Pressing capacity: 0.25-6mm
6. Good quality, durable and easy to carry.

1. Material: nano PET
2. Product use: windows, glass, door gaps, stoves, sinks, corners, toilet bottoms, etc.
3. Transparent and colorless, easy to integrate each scene
4. Strong stickiness, not easy to leave glue after tearing
5. Corner gaps can prevent black and moldy edges
6. Can be freely cut according to demand
7. It can also be used in the gap of the stove, the kitchen sink, etc., anti-oil and anti-fouling
8. Dimensions: 5cm wide x 10m long; 3cm wide x 15m long; 5cm wide x 15m long

1. تم معالجة السطح ليكون مقاومًا للزيت، بحيث لا تبقى بصمات الأصابع وبقع الزيت بسهولة على السطح، ويسهل تنظيفه
2. امتصاص تلقائي، يمكن إعادة اللصق
3. يمكن للفيلم الواقي أن يتناسب بدقة مع شاشة جهازك، ويمكنه حماية شاشة جهازك من الخدوش، والماء، والغبار، والاهتزاز، والانزلاق، وغيرها
4. هذا الفيلم الزجاجي المقسى يتمتع بصلابة عالية، لذا يمكنه منع نفسه من الخدش أو الكسر. إذا تعرض للتلف، سينكسر الزجاج المقسى إلى قطع صغيرة غير حادة لضمان سلامة المستخدم
5. يوجد لاصق قوي في الخلف، سهل لصق الفيلم، وقريب من الشاشة، لذلك لن يؤثر على حساسية اللمس لشاشة اللمس

1. زجاج فائق النحافة (السماكة ≈0.26 مم)، سماكة السطح: 9H
2. طلاء مقاوم للزيوت: مضاد للزيت، مضاد للأحماض والقلويات
3. المنتج صديق للبيئة وخالي من التلوث
4. معامل أمان عالي، حساسية لمس عالية، ملاءمة وفك سهلة
5. الزجاج المقسى عالي الشفافية ولن يتغير لونه أبداً
6. الجزء المحيط أملس لحماية الشاشة من الكسر

التغليف يشمل:
1 × واقي شاشة من الزجاج المقسى الأمامي
1 × منظف
بدون عبوة للبيع بالتجزئة

About Product:
1. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
2. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
3. Functional. The screen protector can fit your game console well and make a big difference on protecting your game console from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
4. Smooth surface. Even the sides of screen film feels smoothly.
5. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.
6. Durable. With good performance, it can work for a long time.

Installation Instructions:
1. Please use alcohol swabs and microfiber cloth to clean the console screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product.

About Product:
1. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
2. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
3. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
4. Smooth surface. Even the sides of screen film feels smoothly.
5. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.
6. Durable. With good performance, it can work for a long time.

Installation Instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product.

About Product:
1. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
2. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
3. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
4. Smooth surface. Even the sides of screen film feels smoothly.
5. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.
6. Durable. With good performance, it can work for a long time.

Installation Instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product.

About Product:
1. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
2. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
3. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on.When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
4. Smooth surface. Even the sides of screen film feels smoothly.
5. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.
6. Durable. With good performance, it can work for a long time.

Installation Instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.
3. Using excessive force who installing or removing the screen protector may damage the product.

1. Ultra-thin and excellent flexibility. You do not need to worry whether the reflexes of your MacBook would slow down after pasting the film at all.
2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.
3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.
4. Functional. The screen protector can fit your MacBook well and make a big difference on protecting your MacBook from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.
5. Smooth surface. Even the edge of screen film feels smoothly.
6. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.
7. Durable. With good performance and high quality, it can work for a long time.

Installation Instructions:
1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.
2. Peel the protective layer off the adhesive side.
3. Carefully align the glass to the screen.
4. Press the center of the glass then adhesive part will spread over all parts smoothly.

Cautions:
1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.
2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it's been applied.
3. Using excessive force who installing or removing the screen protector may damage the product.

1. This sophisticated LED outdoor solar lamp is ideal for illuminating your house number at night.
2. The environmentally friendly solar powered light charges in natural daylight and turns on automatically at dusk making your door number visible for visitors.
3. Recharges using natural daylight and automatically turns on at dusk.
4. 6 pieces of super bright white LED lights inside weather resistant casing.
5. Quick & easy to install with no wiring needed. Wall fixtures included.
6. Material: ABS,PC
7. Color: As shown
8. LED Beads Quantity: 6
9. Power: 0.36W
10. Mode: Steady on/Off
11. Solar Panel: 2V 130mA
12. Battery: Ni-MH1.2V / 850mAh (included)
13. Waterproof: IP65
14. Working Time: about 8h
15. Charging Time: about 6h
16. Product packaging:
1 x Solar energy digital lamp

1. Material: aluminum alloy + ABS
2. Input voltage: AC85-265V
3. Frequency: 50Hz-60Hz
4. Ultra-thin design, the thickness is only 16 mm
5. LED with bright 2835 lamp beads
6. The hook sling is easy to install
7. Dimensions: 338x110x16 mm
8. Weight: 650 g

Specifications:
1. Item: LED Cabinet Light
2. Wattage: 0.3W
3. Chip Type: SMD2835 x 3pcs
4. Powered By: 12V DC 23A Battery (Not Included)
5. Functions: Auto Switch in Cabinet ON / OFF
6. Finishing: Grey
7. Materials: PVC Housing
8. Color temperature of light: White(5600k-6500k);Warm white(2700K-3500K)
9. Installation: Mounted on the Cabinet Hinge
10. Applications: indoor foyer, living room, bedroom, stair, washroom, cabinet, showcse, wardrobe, bathroom etc.

Working Principle:
1. The Light is mounted on the cabinet hinge
2. When openning the cabinet, the door pushes the switch and light turns on
3. When closing the cabinent, the light turns off.

1. Material: alloy
2. Suitable for wasteland reclamation, bush cutting, crop harvesting, etc.
3. Applicable objects: harder shrubs and weeds
4. The more teeth of the mower blade, the better the balance, the smaller the vibration, the smoother the cutting effect
5. The larger the tooth, the higher the cutting efficiency
6. Aperture: 2.54 cm
7. Dimensions: 25.5 x 25.5 x 0.4 cm
8. 40 teeth, 60 teeth weight: 245 grams
9. 80 teeth,100 teeth weight: 380 grams

Material:silica gel
Drop shipping :Support
Portable , hanging clasp for hanging on bag and waist belt
It can also be placed in the refrigerator to be cooled with ice water.

Material:Aluminum
Style:Outdoor
Description:
1. Net weight: 135 grams
2. Size: 14X7cm Hukou diameter: 9.2 cm
3. Capacity: 0.8L
Features:
1. Made of aluminum, high strength, light weight and excellent thermal conductivity
2. High-quality surface hard oxidation treatment, high hardness anodizing treatment inside and outside the kettle, scratch resistance, corrosion resistance, easy to clean
3. Foldable handle for easy watering and comfortable grip, suitable for outdoor use
4. Easy to carry, suitable for outdoor camping and mountaineering activities, and can be used with outdoor stoves and other equipment.

1. It adopts advanced human body thermal infrared detection and sensing technology, which is different from traditional common technologies such as voice control, touch and button. It has high sensitivity, anti-interference, silent, fast response and long sensing distance. At the same time, it does not emit any type of radiation, the power consumption of the device is very small, and it is non-contact, which can ensure people health to the utmost extent, and avoid accidental infection of germs.
2. Built-in light sensing device, automatic recognition of day and night state, automatic standby during the day, induction light at night, energy saving and environmental protection.
3. User-friendly design, exquisite appearance, stylish and ultra-thin
4. Reasonable structural design, clever concealed fixing, no screws installed
5. Use high-efficiency white LED technology: high efficiency, power saving, long life, no radiation, energy saving, environmental protection, explosion-proof, cold lighting, suitable for various places
6. USB charging, convenient and fast
7. Sensing distance: within 3-5 meters
8. LED life: 50,000 hours or more
9. Sensing angle: 120 degrees
10. LED: 10 lamp beads
11. Brightness: 0.8W
12. Scope: Suitable for wardrobes, corridors, stairs, study, children rooms, garage doors, trunks, gardens, etc.
13. Size: 190x30x15mm
14. Weight: 103g

1. Material: metal + plastic
2. Capacity: 8GB, 16GB, 32GB, 64GB
3. Display: 0.9-inch LCD display
4. Display resolution: 96 x 64
5. Recording format: WAC/MP3
6. Recording method: MIC recording
7. Music format: MP3, WMA, FLAC, APE, OGG
8. USB interface: USB2.0
9. Built-in speaker: 18 x 26mm 8 ohm/1W
10. Recording sampling rate: 48KHZ
11. Headphone jack: 3.5mm, dual channel
12. Signal-to-noise ratio: 80db
13. Battery capacity: 410mAh lithium polymer battery
14. Recording time: about 35 hours
15. Playback time: about 21 hours
16. Product size: about 85 x 26 x 11mm
17. Net weight: about 55g
18. This product is manually measured, and there may be errors of 0.1-0.2 mm and 0.1-0.2 g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!

1. Input: AC100-240V 50-60Hz 0.5A
2. Power: PD 20W+20W
2. Total current output: 4A max
3. Sigle PD output: DC5V/3A, DC9V/2.4A, DC12V/1.8A, 20W max
4. Dual PD port design, it will shunt when dual port charging at the same time
5. Support protocol: PD3.0 protocol
6. Portable style: Small and portable design, necessary charger for home and travel
7. Product support: Quick charging for mobile phones and tablets such as iPhone, iPad, Samsung, Huawei and Xiaomi