منتجات بقيمة 100 دولار بنقرة واحدة
العروض والخصومات الشهرية
رسوم توصيل ثابتة 199
منتجات بقيمة 100 دولار بنقرة واحدة
العروض والخصومات الشهرية
رسوم توصيل ثابتة 199
منتجات بقيمة 100 دولار بنقرة واحدة
العروض والخصومات الشهرية
رسوم توصيل ثابتة 199
منتجات بقيمة 100 دولار بنقرة واحدة
العروض والخصومات الشهرية
رسوم توصيل ثابتة 199
منتجات بقيمة 100 دولار بنقرة واحدة
العروض والخصومات الشهرية
رسوم توصيل ثابتة 199
منتجات بقيمة 100 دولار بنقرة واحدة
العروض والخصومات الشهرية
رسوم توصيل ثابتة 199
القائمة الرئيسية
-
معلومات عنا
سلتك
-
الإلكترونيات والإكسسوارات
-
الكمبيوتر، المكتب والإكسسوارات
-
المنزل والحديقة
-
مستلزمات الحيوانات الأليفة
-
الرياضة والترفيه
-
ألعاب، أطفال ورضع
قائمة الأدراج
-
الإلكترونيات والإكسسوارات
-
الكمبيوتر، المكتب والإكسسوارات
-
المنزل والحديقة
-
الجمال والصحة
-
مستلزمات الحيوانات الأليفة
-
الأمان
-
السيارات
-
الموضة
-
الصناعة والعلوم
-
الرياضة والترفيه
-
ألعاب، أطفال ورضع
للبيع
عرضك الحصري ليوم الجمعة السوداء!
استمتع بخصم إضافي 15% على كل شيء — فقط من أجلك.
ماكسمايزبي إف
عرضك الحصري ليوم الجمعة السوداء!
اختر موقعك
-
مقر إيفولوشن
مجاني
عادةً جاهز للاستلام خلال 24 ساعة
75 الجادة التاسعة، نيويورك، نيويورك 10011، الولايات المتحدة الأمريكية
📞 (+1) 212-456-7890
🕐 الإثنين – الجمعة: ٨:٣٠ صباحًا – ١٠:٣٠ مساءً
السبت: ٨:٣٠ صباحًا – ١٠:٣٠ مساءً
الأحد: مغلق -
الفرع المركزي
استلام في نفس اليوم مقابل ٥ دولارات
جاهز خلال 6 ساعات
240 برودواي، نيويورك، نيويورك 10007، الولايات المتحدة الأمريكية
📞 (+1) 212-987-6543
🕐 الإثنين – الأحد: ٩ صباحًا – ٩ مساءً -
مركز خدمة كوينز
مجاني
جاهز في يوم العمل التالي
٨٩-١٠ كوينز بوليفارد، إلمهورست، نيويورك ١١٣٧٣، الولايات المتحدة الأمريكية
📞 (+1) 917-555-3344
🕐 الإثنين – الجمعة: ٩ صباحًا – ٨ مساءً
السبت: ١٠ صباحًا – ٦ مساءً
الأحد: مغلق
العنوان الفرعي
مقارنة المنتجات
وصف شبكة مقارنة المنتجات الخاصة بك
|
__ __ |
|
|---|---|
| الوصف |
الوصف - __ |
| تقييم |
تقييم - __ |
| البائع |
البائع - __ |
| اللون |
اللون - __ |
|
|
مقارنة المنتجات ( / )
461 منتجات
461 منتجات
ترتيب حسب:
- مميز
- الأكثر صلة
- الأكثر مبيعًا
- ترتيب أبجديًا، من الألف إلى الياء
- ترتيب أبجدي، من ز إلى أ
- السعر، من الأقل إلى الأعلى
- السعر من الأعلى إلى الأدنى
- التاريخ، من الأقدم إلى الأحدث
- التاريخ، من الأحدث إلى الأقدم
4.00 ILS
2. Lightweight, easy to use
3. Comfortable handle and spring design
4. Suitable for cutting cable, wire, plastics and etc
5. Perfect for electronics repair, jewelry processing, model making, fishing and etc
| General |
|
| Package Weight |
|
Receives in 7 days.
30.00 ILS
Features:
1. Switchable relative/absolute measurement at any position
2. Angle and slope reading conversion
3. Data hold
4. Magnet at base
5. Large LCD display
6. 5-minute auto power off
7. Portable size, easy to use with other measuring tools to extend measurement range
Parameters:
1. Measuring range: 4x90 degrees
2. Resolution: 0.05 degrees
3. Accuracy: +/-0.2 degrees
4. Repeatability: 0.1 degrees
5. Battery: AAA battery x 2 (not included)
6. Operating temperature: 0-40 degrees Celsius
7. Material: ABS plastic
| Package Weight |
|
Receives in 7 days.
17.00 ILS
1. The 17-piece polymer clay tool set comes with a full range of essential tools, which can be used to create exquisite pottery and clay works to meet all of your crafting needs.
2. It is suitable for school art classes, DIY handcraft workshops, home pottery activities and parent-child activities, accompanying you to enjoy a wonderful creative time.
3. These clay carving tools are made of high-quality materials including fine wood and stainless steel. They feature a simple and solid structure, and are not easy to get damaged or fall apart.
4. They boast a comfortable and smooth hand feel with great anti-slip performance, allowing you to grip and apply force easily while using.
5. Please note that the metal parts of the tools are sharp. Please be careful during use to avoid getting scratched.
6. Do not soak the wooden-handled tools in water, because wood will absorb water and cause the handles to swell and get damaged. It is recommended to clean and wipe the tools dry after each use, and never let the wooden-handled tools air dry naturally.
| Package Weight |
|
Receives in 7 days.
6.00 ILS
1. Includes 5 dotting tools and 5 double-sided carving knives, providing comprehensive tools for clay art creation
2. Features dotting pins on both ends of each tool, available in 5 different sizes for detailed sculpting and decorating
3. Multi-Material Compatibility: Suitable for various modeling materials including polymer clay, ceramic clay, pottery clay, and air-dry clay
4. All tools feature smooth wooden handles that are comfortable to grip and control during extended crafting sessions
5. Beginner-Friendly: Ideal for clay art beginners, pottery enthusiasts, and DIY crafters seeking essential tools for basic sculpting techniques
| Package Weight |
|
Receives in 7 days.
35.00 ILS
1. The crimping pliers are designed to be effortless to use, with the spring automatically resetting and the crimped terminals being firmly attached and unlikely to fall off
2. The limit device allows the jaws to be adjusted by the ratchet, and the wide-angle rebound mechanism makes it easy to control the size of the terminal closure
3. The plier jaws are made of zirconium alloy, featuring high hardness, high toughness, long service life, and excellent wear resistance
4. Fully waterproof and dustproof, with strong protection performance, it lasts longer in use
5. The connector wrench is quick and convenient to install, lightweight
6. Widely used for connecting cables in household photovoltaic systems, small-scale photovoltaic systems, and industrial photovoltaic power generation
7. Packaging list:
- Connector wrench x 2
- Crimping pliers x 1
- Connectors x 10
- Inner cores x 10
- Packaging x 1
| Package Weight |
|
Receives in 7 days.
3.00 ILS
1. Stainless steel handle, wear-resistant and durable, high hardness, high temperature and corrosion resistance
2. Fine grinding, arc design, delicate feel, rounded corners, fine card slot, easy to install
3. Sharp blade, more durable
4. Use: plant grafting, car film, plastic trimming, fruit carving, etc.
5. Material: stainless steel, carbon steel
6. Handle size: about 12.6 x 1.1cm
7. Weight: handle about 15g
| Package Weight |
|
Receives in 7 days.
11.00 ILS
1. Meet a variety of needs, applicable to wood, plaster, paper, fruit and vegetable carving
2. Round handle design, ergonomic design, comfortable to hold
3. Sharp cutting edge, easy to carve, high hardness and toughness, long service life
4. Full-open blade, sharp and durable
5. Material: beech wood handle + blade 7cr17
6. Size: about 15.8 x 3cm
7. Weight: about 106g
8. Note: the carving knife is very sharp, must pay attention to safety when using, it is recommended to use with anti-cutting gloves
| Package Weight |
|
Receives in 7 days.
7.00 ILS
1. When the operation of the tip of the sharp knife in the board to promote, wood chips from the tip of the slot spit out, the tip of the sharp knife pushed through the part of the carving out lines
2. Compact and portable, with 7 pieces of cutter head, wide applicability
3. Scope of use: suitable for soft wood, plaster, paper, fruit and vegetable carving, to meet a variety of needs
4. Material: plastic blade + stainless steel tip
5. Handle size: about 9.5 x 2.5 x 1.8cm
6. Weight: about 31g
| Package Weight |
|
Receives in 7 days.
16.00 ILS
1. Wooden handle, polished smooth, comfortable to the touch, easy to operate
2. Sharp knife, carving time and labor-saving
3. Scope of application: suitable for flower carving/root carving/wood carving/engraving/carving/woodworking/hand carving, etc.
4. Material: walnut handle + chrome vanadium alloy steel
5. Handle size: about 9.5 x 2.5 x 1.8cm
6. Weight: about 190g
| Package Weight |
|
Receives in 7 days.
4.00 ILS
1. Stainless steel needle + plastic handle, more comfortable to use, suitable for all kinds of pottery creation
2. Handle with diamond shape design, not easy to slip, stable operation
3. Simple operation, multiple textures to meet the needs of the use of the scene
4. Can be used for clay, clay, soft pottery, handicrafts, etc.
5. Material: stainless steel + aluminum alloy + plastic
6. Size: about 14.3 x 0.8cm
7. Weight: about 13g
| Package Weight |
|
Receives in 7 days.
6.00 ILS
1. Suitable for clay sculpture, fine handicrafts sculpture carving
2. Comfortable grip, convenient operation
3. Smooth and burr-free, not easy to crack, durable
4. Lightweight and easy to use, rounded blade, does not hurt the hand
5. Material: wood
6. Weight: about 81g
| Package Weight |
|
Receives in 7 days.
5.00 ILS
1. 3 handles (each with a blade) + 10 blades, blades of different shapes and sizes
2. Comfortable handle, easy to operate
3. Replaceable blade design, easy to use
4. Scope of application: deburring, modeling, engraving, engraving prints, paper marking, fruit carving, etc.
5. Blade material: 65 manganese steel
6. Box size: about 15.5 x 5.8 x 2.7cm
7. Weight: about 127g
| Package Weight |
|
Receives in 7 days.
3.00 ILS
1. Suitable for handicrafts clay carving, sculpture, etc., a wide range of uses
2. Grip feeling comfortable, use more smooth hand
3. Material: plastic, iron
4. Size: about 12.7 x 1.4cm
5. Weight: about 8g
| Package Weight |
|
Receives in 7 days.
3.00 ILS
1. Meticulous workmanship, clear grain, pattern modeling at your will
2. The ball shape can refine the edge of petals and leaves, and also can make round hole decoration
3. Dual-head design, easy to use
4. Can be used for soft clay molding, flower and candy modeling, to create a wrinkled petal pattern
5. Specification: 4pcs/set
6. Size: length about 15.1cm
7. Weight: about 18g/set
| Package Weight |
|
Receives in 7 days.
8.00 ILS
1. Sharp blade, widely used in soft metal, wood, plastic processing sanding
2. Single slot design, suitable for metal and other hard materials
3. Universal round handle design, applicable to a wide range of machines, easier to clamp the tool clamping right
4. Suitable for wood / plastic and other soft materials such as carving, sanding, carving, chamfering, hollowing, grooving, peeling and so on
5. Material: high-speed steel
6. Size: length about 4cm, handle diameter about 3mm
7. Weight: about 29g
| Package Weight |
|
Receives in 7 days.
6.00 ILS
1. Wooden handle, round and smooth, comfortable to touch
2. Sturdy and durable, easy to use, easy to clean
3. Suitable for clay sculpture, fine carving, fine handicrafts sculpture carving
4. Material: wood, iron
5. Package size: about 28.5 x 27.7cm
6. Weight: about 66g
| Package Weight |
|
Receives in 7 days.
3.00 ILS
1. 30 degree peaked cutting edge, sharp tip, sharp cutting without obstruction, smooth trimming of the knife edge without burrs
2. Rounded non-slip pencil, chuck tightly without shaking, cutting without shaking, by twisting to realize the role of blade tightening, stable and smooth operation
3. Sharp steel blade, durable, sharp, cutting and engraving more labor-saving
4. Quick change of blade, simple operation, without tools (note that the blade is sharp, be careful not to hurt your hands)
5. Usage: used for laundry detergent bottle carving, rubber stamp carving, paper-cutting carving, sticker cutting, model assembly production, handmade DIY and so on
6. Material: pen shaft: plastic + metal; blade: 65 manganese steel
7. Packing list: pen shaft x 1, pen cap x 1, blade x 12
8. Pen shaft size: about 138 x 9mm
9. Weight: about 16g
| Package Weight |
|
Receives in 7 days.
5.00 ILS
1. Carbon steel blade, high hardness, high toughness, overall quenching treatment
2. Containing a variety of blades to cope with different carving needs
3. 22 degrees sharp tip, cutting smooth, strong and sharp
4. Use: paper, rubber stamps, papercraft engraving
5. Material: carbon steel, plastic
6. Handle size: about 120 x 8mm
7. Weight: about 68g
| Package Weight |
|
Receives in 7 days.
4.00 ILS
1. Sharp cutting edge, high-strength alloy steel blade
2. Buckle ring design, compact and lightweight, can be carried around
3. Use: carving fruit, wood, paper cutting, unpacking, unpacking courier
4. Material: brass + alloy
5. Single size: about 52 x 8.8mm
6. Single weight: about 13g
| Package Weight |
|
Receives in 7 days.
5.00 ILS
1. For self-adhesive, transfer paper, reflective film, thin cardboard, pvc and other lettering
2. Three angles of the knife mouth (30/45/60 degrees), the material for the tungsten steel + surface plating
3. Knife blade mouth with rubber sleeve protection, applicable equipment for lettering machine engraving machine
4. Material: tungsten steel
5. Single size: about 24 x 1.95mm
6. Single weight: about 0.56g
| Package Weight |
|
Receives in 7 days.
5.00 ILS
1. Four-claw design for non-slip operation; overall polished chrome plating for rust resistance
2. Sturdy and durable, unbreakable, bendable, and non-slip, making operation easy
3. Forged from high-carbon steel and high-temperature quenched, providing excellent impact and torque resistance
4. Strong gripping force for effortless operation
5. Material: carbon steel
6. Applicable nuts: M10 + M13
7. Size: about 15 x 1.8cm, shank diameter about 6.35mm
8. Weight: about 59g
| Package Weight |
|
Receives in 7 days.
من 4.00 ILS
1. This high-carbon steel pliers trio combines durability and precision, featuring a black oxide finish for enhanced corrosion resistance. Ideal for beadwork, wire crafting, and jewelry repair.
2. High-carbon steel heads enhance durability, paired with textured PVC handles for secure gripping.
3. Hook Pliers: Angled tip for opening small rings and connectors.
4. Positioning Pliers: Grooved jaws assist in bead placement during assembly.
5. Cutting Pliers: Sharp blades trim thin craft wires.
| Package Weight |
|
Receives in 7 days.
من 5.00 ILS
1. Material: carbon steel or (35K)
2. Application: used with corresponding sockets, extension rods, universal joints, etc., for use in auto repair, factories, shops, and homes.
3. 1/4 inch 6.35mm connector, can connect to sockets, screwdriver sockets, etc.
4. 14 inch 6.35mm interface, can connect to slide bars, ratchet wrenches, AD connectors, etc.
5. Through-hole design, industrial plastic handle, comfortable grip.
6. Anti-slip ball spring design, tightly fitting steel ball locking device, anti-slip and non-slip.
7. Weight: 74g
8. Dimensions: length 150mm
| Package Weight |
|
Receives in 7 days.
من 9.00 ILS
1. TPR cover rubber, soft material, comfortable grip
2. The tape pulls out and locks automatically to avoid rebounding and hurting your hand, and it automatically recovers after pressing, so you can use it with confidence
3. There is a cushioning device for tape recovery, so it is not easy to hurt the tape when it is recovered
4. Matte spraying, U-shaped surface, clear scale
5. Portable buckle + string design, hanging / hand-held dual-use, easy to carry, easy to use
6. Retractable and shockproof, 0-point correction, accurate measurement.
7. Material: TPR rubber
8. Specifications: 3m x 16mm, 5m x 19mm, 7.5m x 25mm, 10m x 25mm
| Package Weight |
|
Receives in 7 days.
13.00 ILS
1. Material: chrome vanadium steel
2. Ratchet direction is adjustable in both directions, and the buckle can be adjusted to suit your needs for easy use.
3. Designed for tight spaces, it allows for one-handed operation without any pressure.
4. Strong magnetic attachment and a standard hexagonal connection eliminate the worry of bit drops.
5. Knurled, non-slip handle for a comfortable grip.
6. Weight: 73g
7. Dimensions: 100 x 18 x 15.8mm
8. Note: this product does not include a screwdriver.
| Package Weight |
|
Receives in 7 days.
3.00 ILS
1. Material: SK5 Blade + ABS
2. Suitable for gypsum board, fiberboard, cork board, and acoustic panels
3. Double-groove planing and chamfering for a more aesthetically pleasing and smoother finish (straight edge can only be used to trim widths less than 14mm)
4. Made of ABS engineering plastic, its lightweight and compact for ease of use. Its lightweight yet durable.
5. Removable and replaceable blade offers high hardness, a sharp edge, effortless planing, and a long service life.
6. Screw handle for easy unscrewing, comfortable grip, and long service life.
7. Dimensions: 142 x 55 x 16.5mm
8. Weight: 76g (yellow) / 78g (blue)
| Package Weight |
|
Receives in 7 days.
7.00 ILS
1. Material: tool ateel + plastic
2. Tool steel blades, tough and sharp, no snags or burrs
3. Commonly used for cross-stitch, clothing, thread trimming, office and home use
4. Protective cover for secure storage and prevents accidental injury, making home working more secure
5. Weight: 16g
6. Dimensions: 116x16mm
| Package Weight |
|
Receives in 7 days.
9.00 ILS
1. Blade material: stainless steel
2. Handle material: water grapewood
3. Applications: pushing, chopping, cutting, thinning, trimming, etc.
4. Sharp blade for silky-smooth cutting
5. Comfortable, ergonomic feel for easier application
6. Precision connection between handle and blade, durable and resilient
7. Weight: bevel blade net weight 61g; Round blade net weight 63g; Straight blade net weight 65g
8. Dimensions: 178 x 35mm
9. Note: due to the natural properties of wood, color and texture may vary from batch to batch. Minor scratches are normal.
| Package Weight |
|
Receives in 7 days.
6.00 ILS
1. High hardness, resistant to deformation and wear
2. Easy to disassemble and install screws and nuts
3. Saves effort to use and widely applicable
4. Hardness: HRC40-45
5. Surface treatment: sandblasting
6. Material: 40Cr (stainless steel)
| Package Weight |
|
Receives in 7 days.
28.00 ILS
1. The Multi-Function Digital Inclinometer is a precision electronic tool used for accurately measuring angles, levels, and slopes. Featuring a digital display, magnetic adsorption, and multiple measurement modes, it is ideally suited for professional fields such as mechanical calibration and construction.
2. High-Resolution Backlit Screen: The green backlit screen ensures clear reading of values even in dark or low-light environments, enhancing usability under various working conditions.
3. High-Precision Measurement: With a resolution of 0.05 degrees and an accuracy of ±0.3 degrees, it provides reliable measurements for calibrating machine tools and production line equipment, ensuring machining precision.
4. Automatic Screen Rotation: When the meter is inverted, the displayed value automatically flips, facilitating easy reading from any direction during horizontal, vertical, or slope measurements.
5. Dual Measurement Modes: Supports two modes: Relative measurement allows setting an arbitrary zero angle; Absolute measurement is based on the true horizontal position, suitable for various application scenarios.
6. Four-Sided Magnetic Adsorption Design: Magnets on all four sides allow it to firmly adsorb onto metal surfaces, enabling stable and convenient measurement and preventing slippage.
Specifications:
1. Functions: Angle measurement, Level measurement, Slope measurement, Relative measurement, Absolute measurement
2. Display: Green backlit screen
3. Resolution: 0.05 degrees
4. Accuracy: ±0.3 degrees
5. Power Supply: 2 x 1.5V AAA batteries (not included)
6. Dimensions: 6.5cm x 6.46cm x 3.2cm
7. Weight: 84g
8. Additional Features: Auto power-off after 12 minutes of inactivity, Data hold
| Package Weight |
|
Receives in 7 days.
عرض 30/461
استكشف المجموعات ذات الصلة
وصف المجموعة
أنجز العمل بأدوات كهربائية احترافية من Trustpick. من المثاقب والمناشير إلى الطواحين والسنادات، تقدم مجموعتنا المختارة الأداء والمتانة التي يطلبها عشاق الأعمال اليدوية والمحترفون في المجال.
- مثاقب ومفكات تأثير
- مناشير دائرية ومنشار رقاعي
- طواحين زاوية وسنادات
- أدوات دوارة وأدوات اهتزازية
- ملحقات وأجهزة بطاريات الأدوات الكهربائية
- اختيار تحديد يؤدي إلى تحديث الصفحة بالكامل.
- يفتح في نافذة جديدة.