1. Small and convenient to carry.Suitable for all kinds of construction pipe leakage detection.
2. The penetrability is increased several times, and the sound quality is greatly improved with adopts new components and advanced technology.
3. This product use built-in battery (can be recharged repeatedly)
4. Power consumption:12mA
5. Probe sensitivity:-60 DDB
6. Sound input: 32-ohm earphone.
7. Maximum audio Magnification: 13000X

1. Bluetooth version: V5.0
2. Bluetooth frequency: 2.4Hz
3. Power charging: 5V 500mAh (before use, it is recommended to fully charge the battery
)
4. Transmission distance: 10 meters
5. Frequency response: 20Hz-15Khz
6. Size: 70x14mm
7. Use one end of the provided USB cable to connect to the mini-USB input of this bluetooth music receiver
8. Connect the other end of the USB cable to your computer, notebook or USB charging port with 5V output. At this time, the LED light of the Bluetooth music receiver turns red, indicating that it is charging. When fully charged, the red light is off, and the blue light is always on. Bright

Bluetooth pairing connection:
1. Press and hold the button on the music receiver for 1 second, the Bluetooth will enter the ready pairing state, turn on the Bluetooth function of the mobile phone, and the mobile phone will search for the device name of this product H-011
2. Select H-011 and connect it, some mobile phones will ask for the connection password of 0000
3. After the connection is completed, the mobile phone will show that H-011 is connected, and you can perform various operations at this time (the next time you turn on the phone, just short press the power button for 1 second, the blue light will turn on and let go, and the Bluetooth receiver will automatically Back to the mobile phone, the Bluetooth receiver can only be connected to one mobile phone at the same time. When you need to connect to another mobile phone, you need to directly press and hold for 3 seconds in the off state to enter the ready pairing state. At this time, you can use another mobile phone. mobile phone to search and connect)
4. After the pairing is successful, the device will be powered off and will automatically reconnect the next time it is powered on, no need to manually pair again
5. Play mobile phone music (A2DP mode)
6. After the connection is completed, play the music in the mobile phone, you can connect all the sounds broadcast in the mobile phone to the car audio device through the audio cable, and play it from the car audio (for example: mobile phone music, Bluetooth calls, mobile phone navigation broadcast sounds …)

Product Description:
1. When your mobile phone uses a Bluetooth microphone by default, you can use the built-in MIC to achieve hands-free calling when a phone is connected.
2. When the phone calls, press the power button to answer the voice call, and then press to hang up
3. After the call is completed, it will automatically switch to the previous state of the phone
4. After disconnecting from the bluetooth device, the bluetooth receiver will automatically shut down after 5 minutes
5. Built-in microphone design, HD hands-free calling
6. Stereo Bluetooth chip, enjoy wireless HIFI, Bluetooth receiving distance up to 10 meters
7. The surface has a skin-friendly feel, scratch-resistant and wear-resistant design, suitable for a variety of equipment

1. Material: velvet, elastic band, aluminum strip
2. Two elastic band design, free adjustment, a variety of wearing ways
3. It is fixed with an adhesive strap, which is firmly pasted and adjustable in elasticity
4. Built-in aluminum strips to fix fingers and reduce finger activities
5. Light and breathable fabric, sweat-absorbent and skin-friendly, flexible and high-elastic
6. Weight: 12.5 grams

1. The LED light design inside the jewelry box will automatically light up when the box is opened
2. Delicate and soft flannel lining to protect jewelry
3. The surface adopts baking varnish technology, the shape is three-dimensional, and the hand feels comfortable
4. Hidden opening and closing metal sheet on the back, beautiful and comfortable
5. Material: plastic, velvet, metal
6. Features: 3D heart-shaped shape, built-in LED spotlights, surface baking varnish technology, plush lining
7. Built-in battery: CR2016 x 2 button batteries (delivery with batteries)
8. Product size: 7.2 x 6.6 x 4.5 cm
9. Weight: 61g/pc
10. Note: only the jewelry box will be delivered, nothing else!

1. Surface baking varnish process, good texture, comfortable hand feeling
2. High-quality microfiber lining, durable and breathable, preventing jewelry from being scratched
3. Built-in LED spotlight, the light turns on when the cover is opened, creating a romantic atmosphere
4. Gold frame wrapping decoration, more beautiful
5. Adopt seamless hinge, hidden back design, beautiful and practical
6. Material: plastic, microfiber
7. Function: jewelry storage and display
8. Features: rose shape, built-in LED spotlight, surface baking varnish process, plush lining
9. Built-in battery: CR2016 button battery x 2 (battery included in delivery)
10. Outer dimension: 7.3 x 5.5 cm
11. Inner dimensions: ring box: 4 x 3.5 cm, pendant box: 3.8 x 3.5 cm
12. Weight: 70g/pc
13. Note: Only the jewelry box will be delivered, nothing else!

1. Material: glass
2. Easy to assemble and disassemble, easy to carry.
3. Glass material, durable and can be used for a long time.
4. Weight: 750g
5. Volume: 13x13x30cm

1. Applicable products: baby bottles, glass water cups
2. Small and easy to carry, mom is so relaxed
3. The baby drinks warm milk at any time and keeps the temperature constant (the USB connection is required for the heat preservation)
4. Can be connected to mobile power, charging head, car USB
5. Adjustable circumference, suitable for a variety of feeding bottles (diameter 55-80mm)
6. 3 levels of temperature adjustment, continuous constant temperature heating
7. Three-color light reminds, easy to control the milk temperature
8. Four-layer material, firmly lock temperature (PU first layer, PU second layer, heating layer, comfortable inside)
9. Material: pu leather + heating film + lining
10. Power input: 5V2A 50HZ
11. Power: 10W
12. Product size: 29 x 13cm
13. Packing list: baby bottle bag, data cable, manual

1. Material: log + silicone oil coating
2. Use: Oil-proof filter disc for pizza, bacon, meat patties, barbecue food
3. Suitable for air fryer, toaster, instant pot, microwave oven, pan;
4. The oil-free design does not require washing dishes, the items are oil-proof, non-stick on both sides, and cleaning is easier;
5. Made of logs and silicone oil coating, unbleached, no fluorescent agent, no BPA, no PFA;
6. Dimensions: 14 x 20.5 cm
7. Packing: Transparent plastic box packing

1. The base has built-in LED lamp beads for luminous display
2. Open design on both sides for fast heat dissipation
3. Does not affect the interface connection data cable
4. Material: plastic + electronic components
5. Function: storage and display of game consoles
6. Base color: 20 colors (adjustable)
7. Luminous base power supply: USB connection power supply
8. Base remote control battery: CR2025 button battery x 1 (battery included in delivery)
9. Size: Luminous base: 30.3 x 11.7 x 2.7 cm
10. Weight: Luminous base: 304 g/piece

Packing list:
-Luminous base x 1
-Remote control x 1

1. Color: blue and white, gray and white
2. Material: foam glass
3. Easily remove dead skin, foot crumbs, and old calluses.
4. Prevent the dead skin of the feet from accumulating into the stratum corneum, and make the feet soft and smooth.
5. Double-sided use: For different foot problems, two materials are used to polish the surface.

1. Material: polyester fiber
2. Applicable: wild, mountaineering, snow, mud and other places
3. Features: anti-snow, waterproof, anti-sand, anti-mosquito, moisture-proof
4. Adopt 3D three-dimensional cutting process to fit the legs
5. Fit the foot, bundle firmly, not easy to fall off
6. Anti-drop hook design, adapt to different environments
7. The opening of the adhesive sticker on the front is convenient and quick to wear
8. Both ends of the elastic band design, close to the ankle and leg
9. Dimensions: 24 x 19 cm
10. Weight: about 81g/pair
11. Note: Only leg covers are sent for delivery, no other!

1. Bluetooth: 5.0+ERD
2. Receiving distance: 15m without barrier
3. Speaker: 40mm
4. Response frequency: 20Hz-20KHz
5. SNR: 85dB
6. Impedance: 30 ohm
7. Battery capacity: 400mAh
8. Charging time: 1-2 hours
9. Music time: 11 hours at maximum volume
10. Usage: Bluetooth / TF card / 3.5mm audio cable connection
11. Size: 18x19x7.5cm
12. Weight: 230g
13. Packing list:
- Headset x 1
- 3.5mm audio cable x 1
- Charging cable x 1
- Manual x 1

Sony 1/3 CCD، 420TVL، 0 لوكس (مع الأشعة تحت الحمراء مفعلة)، 18 قطعة من أضواء IR F5، مسافة 20 متر، عدسة 6 مم

كاميرا قبة CCD/CMOS بالأشعة تحت الحمراء الملونة مع نسبة إشارة إلى ضوضاء أكبر من 48 ديسيبل ومصدر طاقة 12 فولت تيار مستمر

الميزات:

1) يتكيف مع مستشعر صورة CCD عالي الأداء

2) دقة عالية وصورة واضحة

3) إضاءة منخفضة، 0 لوكس مع الأشعة تحت الحمراء لليل والنهار، مراقبة كاملة طوال اليوم

4) يدعم تعويض الإضاءة الخلفية ويدعم توازن اللون الأبيض التلقائي

5) نسبة إشارة إلى ضوضاء عالية، صورة نظيفة، يدعم قليلاً الغالق الرقمي التلقائي

6) يدعم التضخيم الرقمي التلقائي

المواصفات:

1) المستشعر: CCD ملون 1/3 بوصة، CMOS

2) جهاز الصورة: Sharp أو Sony

3) نظام التلفاز: PAL/NTSC

4) نظام المسح: 2:1 متداخل

5) نظام التزامن: داخلي

6) تردد التزامن الأفقي: 15.625 إلى 15.734 كيلوهرتز

7) تردد التزامن الرأسي: 50 إلى 60 هرتز

8) خرج الفيديو: 1.0 فولت-ذروة إلى ذروة، 75 أوم

9) استهلاك جاما: 0.45

10) التضخيم التلقائي للإشارة: تلقائي

11) نسبة الإشارة إلى الضوضاء: أفضل من 48 ديسيبل

12) توازن اللون الأبيض: تلقائي

13) الغالق الإلكتروني: 1/60 (NTSC)/1/50 (PAL) إلى 1/10,000 ثانية

14) تعويض الإضاءة الخلفية: تلقائي

15) مصدر الطاقة: 12 فولت تيار مستمر

16) درجات حرارة التشغيل: -20 إلى 70 درجة مئوية، الرطوبة النسبية 95% كحد أقصى

17) درجات حرارة التخزين: -40 إلى 85 درجة مئوية، الرطوبة النسبية 95% كحد أقصى

18) العدسة: f = 6mm27) كاميرا

19) الأبعاد (بدون الحامل): 110 × 110 مم

20) الوزن الصافي: 190 جم

الميزات:
1. يتكيف مع مستشعر صورة CCD أو CMOS عالي الأداء
2. دقة عالية وصورة واضحة
3. إضاءة منخفضة، 0 لوكس مع IR لنهار وليل، مراقبة كاملة طوال اليوم
4. يدعم تعويض الإضاءة الخلفية ويدعم توازن اللون الأبيض التلقائي
5. نسبة إشارة إلى ضوضاء عالية، صورة نظيفة، يدعم قليلاً الغالق الرقمي التلقائي
6. يدعم الكسب الرقمي التلقائي
المواصفات:
1. المستشعر: CCD ملون 1/3 بوصة
2. جهاز الصورة: SN CCD
3. نظام التلفاز: PAL/NTSC
4. نظام المسح: 2:1 متداخل
5. نظام التزامن: داخلي
6. الإضاءة: 0 لوكس (IR مفعّل)
7. نسبة الإشارة إلى الضوضاء: أكبر من أو تساوي 48 ديسيبل
8. مخرج الفيديو: 1.0Vp-p، 75II مركب، BNC × 1
9. نسبة جاما: أكبر من أو تساوي 0.45
10. البعد البؤري: عدسة ثابتة 6 مم
11. زاوية الرؤية: عمودي: 92 درجة / 53 درجة
12. نسبة التكبير: ثابتة
13. وضع التحكم: ثابت
14. نهار/ليل: تلقائي
15. تعويض الإضاءة الخلفية: تلقائي
16. توازن اللون الأبيض: ثابت
17. خاصية جاما: أكبر من أو تساوي 0.15
18. الغالق الإلكتروني: PAL: 1/50 إلى 1/100,000 ثانية، NTSC: 1/60 إلى 1/100,000 ثانية
19. مصابيح LED تحت الحمراء: قطر 5 مم، 36 قطعة LED تحت الأحمر
20. مسافة الأشعة تحت الحمراء: 25 مترًا
21. الطيف تحت الأحمر: 850 نانومتر
22. درجة حرارة التشغيل: -10 إلى +50 درجة مئوية
23. درجة حرارة التخزين: -40 إلى +60 درجة مئوية
24. جهد/تيار الإدخال: تيار مستمر 12 فولت/500 مللي أمبير
25. مادة الهيكل: سبيكة الألمنيوم
26. أبعاد الكاميرا (بدون الحامل): 125(L) × 75(W) × 65(H) مم
27. الوزن الصافي: 360 جم

1. يستخدم سبائك الألمنيوم عالية الجودة لضمان دعم خفيف الوزن ولكنه عالي القوة للغاية.
2. يمكن إبقاؤه ملتصقًا بقاعدة الكاميرا ويسمح لك بتركيب أو إزالة الكاميرا من الحامل الثلاثي بسرعة وسهولة.
3. لا يؤثر على فتح غطاء حجرة البطارية وفتحة كابلات البيانات.
4. تحتوي قاعدة اللوحة على فتحات تثبيت إضافية ذات خيوط 1/4 إنش-20 وفتحة حزام لوظائف إضافية.
5. متوافق مع معظم كاميرات SLR التي يتطابق طولها وعرضها مع قاعدة تركيب L plate.

1. نقل الفيديو عبر كابل UTP CAT5.
2. توفير 10-20% من تكاليف الأسلاك.
3. لا حاجة للطاقة.
4. أقصى مسافة حركة فيديو CCTV: 600م

1. You have one stereophonic signal source (TV audio frequency, player, video game, mobile phone, PAD, computer, gramophone) want to output to other equipment at the same time (example the power amplifier, loudspeaker box or prepose amplifier)
2. This type product able to solve that 1 set stereophonic input able to distribute output 4 sets stereophonic,
3. Output has volume adjustment function, output without sound amplify function, the output keep the original tone quality and volume same with the input.
4. Input and output adopt standard RCA interface
5. Simple installation: input and output, able to be used once inserted, convenient to install, input and output signal no consumption, then can enjoy different hearing experience

Product Parameter
1. Material: Metal
2. Interface: RCA interface
3. Power supply: USB 5V supply power
4. Input and output impedance: 10K ohms - 50K ohms
5. Frequency responding: 20 - 20kHz.
6. Distortion: Less than 0.002%
7. Output consumption: Less than 0.01dB
8. Signal gain: 0dB
9. Signal-noise ratio S/N: Greater than 98dB
10. Input and output interface: Standard RCA interface
11. Input passageway: 1 set stereophonic input
12. Output passageway: 4 sets stereophonic output at the same time (4 sets output unified volume adjustment)
13. Single product net weight: 0.21kg
14. Product size: 95mm x 53mm x 38mm

Kit list
1. B063 1 in 4 out audio frequency signal distribute device RCA interface x 1
2. USB power supply wire (wire length 100cm) x 1

1. You have one stereophonic signal source (TV audio frequency, player, video game, mobile phone, PAD, computer, gramophone) want to output to other equipment at the same time (example the power amplifier, loudspeaker box or prepose amplifier)
2. This type product able to solve that 1 set stereophonic input able to distribute output 4 sets stereophonic,
3. Output has volume adjustment function, output without sound amplify function, the output keep the original tone quality and volume same with the input.
4. Input and output adopt 3.5mm earphone interface
5. Simple installation: input and output, able to be used once inserted, convenient to install, input and output signal no consumption, then can enjoy different hearing experience

Product Parameter
1. Material: metal
2. Interface: 3.5mm interface
3. Power supply: USB 5V supply power
4. Input and output impedance: 10KΩ - 50KΩ
5. Frequency responding: 20 - 20kHz.
6. Distortion: Less than 0.002%
7. Output consumption: Less than 0.01dB
8. Signal gain: 0dB
9. Signal-noise ratio S/N: Greater than 98dB
10. Input and output interface: Standard 3.5mm interface
11. Input passageway: 1 set stereophonic input
12. Output passageway: 4 sets stereophonic output at the same time (4 sets output unified volume adjustment)
13. Single product net weight: 0.15 kg
14. Product size: 87mm x 52mm x 22mm

Kit list
1. B064 1 in 4 out audio frequency signal distribute device 3.5mm interface x 1
2. USB power supply wire (wire length 100cm) x 1
3. 3.5 public to public wire (wire length 100cm) x 1

Product description:
1. Are you stuck with a set of power amplifier signals that need to be assigned to several speakers? Now this distribution panel can solve the problem of allocating one set of stereo inputs to four sets of speakers at the same time.
2. Number of speakers: we recommend you to use no more than 4 sets of speakers
3. Support power handling: rated power of each channel with amplifier up to 300W
4. Speaker wires: 2 or 4 wires, 16 AWG to 14 AWG
5. Easy to install: The input and output connectors can be wired, and the partition can be set. Compact design - Simple and compact design

Product parameters:
1. Material: Metal
2. Input: 1 set of input (banana plug)
3. Output: 4 sets of output (banana plug)
4. Power: Support 300W (The product requires no external power supply and is easy to install)
5. Net weight: 0.51 kg
6. Product weight after packaging: 0.56kg
7. Product size: length 245mm x width 65mm x height 51mm
8. Package size: length 250mm x width 73mm x height 60mm
9. Kit list: 1 in and 4 out Amplifier x 1

1. Eco-friendly ABS plastic.
2. 1 male to 2 females.
3. Mix music by connecting multiple music players at once.
4. Connect up to two headphones to one device for sharing music with friends.
5. 3.5mm headphone adapter splits line into two 3.5mm ports.
6. Applicable in Apple iPad / iPhone / iPod / Samsung / HTC / BlackBerry and other mobile phones with 3.5mm jack.
7. Also applicable in tablets, notebook computer, desktop computer, MP3 / MP4, etc.

1. Lightweight, allowing you to walk naturally and improve stability or reduce the risk of injury
2. A great way to keep your feet firmly planted on the ground in all weather conditions
3. They fit almost any type of footwear, from sneakers to work boots.
4. Ideal for winter outdoor sports enthusiasts, hunters, ice anglers, snowmobiles, etc. Gives you more confidence to walk, climb, ice fish on snow, ice or mud.
5. Material: stainless steel bottom plate + TPR strap
6. The tensile properties of the product elastomer are strong and the cold resistance is -35
7. Applicable size: M (35-40 size shoes), L (41-45 size shoes)
8. Weight: M size 326g/pair L size 355g/pair
9. Tooth height: 1.2cm

1. Lightweight, allowing you to walk naturally and improve stability or reduce the risk of injury
2. A great way to keep your feet firmly planted on the ground in all weather conditions
3. They fit almost any type of footwear, from sneakers to work boots.
4. Ideal for winter outdoor sports enthusiasts, hunters, ice anglers, snowmobiles, etc. Gives you more confidence to walk, climb, ice fish on snow, ice or mud.
5. Material: TPE silicone + 201 reinforced stainless steel chain + 201 reinforced stainless steel claw
6. The tensile properties of the product elastomer are strong and the cold resistance is -35
7. Applicable size: M 36-40, L 41-44, XL 44-47
8. Weight: M 395g, L 415g, XL 455g
9. Rubber size: M, 190 x 155 x 4.5mm, L, 210 x 160 x 5mm, XL, 230 x 175 x 6mm

Included accessories: each pair comes with a black storage bag + 2 sticky straps

1.Surface cotton flannel is three-dimensional, warm, soft and thick.
2.Bottom TPR material, possesses good elastic resilience and abrasion resistance.
3.Honeycomb design provides a stable structure, and dispersives thhe pressure to the bottom of the foot.
4.It can fit your shoes and heel.

1. Main material: stainless steel
2. 106 all stainless steel, 107 copper tube + stainless steel panel
3. Features: connect the door frame and the door to change the medium, fixed the door
4. Uses: Suitable for all kinds of KTV box doors, door hidden doors
5. Built-in spring ball, the rebound is still strong

1. Prevents you from slipping while walking on muddy or snowy road
2. Single chain hooks with heat treatment, durable in use
3. Thickness of each tooth is 2cm, high hardness, good climbing and fixing ability, good for difficult road surface
4. Material: TPE soft rubber + 201 stainless steel
5. Rubber size:
- Size M, 190X155x4.5mm
- Size L, 210x160x5mm
- Size XL, 220x175x6mm
6. Applicable shoe size:
- Size M, 36-40
- Size L, 41-44
- Size XL+, 44-47